Tag Archives: World of Tanks

Armory 1/72 M41A1/A2 Walker Bulldog p1.


Well, I decided to buy Armory’s new injection molded model, the Walker Bulldog. I have written a review of it on Armorama; when it comes live I will link it here.

My aim with the purchase was to do a conversion, I was not particularly interested in the Bulldog itself.


As I wrote in the review, the build was pretty nice; I found no major hurdles -apart from the tool rack which I just left off. I also did not install the gun lock since I will be using the chassis for a different vehicle with a different gun. There are some minor issues with the model, but none of them are deal breaking (and at least the gun is not assembled from two halves…)


There’s an awful lot of PE coming with the kit; the smaller parts were glued on using white glue. The sink marks on the tracks are somewhat annoying but they will be filled with some mud at the end.


Next up: painting and weathering.


And then – when I buy the necessary supplies: THE CONVERSION.

Tankfest, 2018, part 5. Baking outside


There were several vendors in tents selling replica weapons, army surplus and scale models. There were several food vendors, too (selling for surprisingly reasonable prices), and a lot of heat-stricken people wandering about. Since it was Friday, the program was only a “dress rehersal” for the main events of Saturday and Sunday; regardless, seeing (and hearing) these tanks was pretty impressive.

I never thought the clicking of the tracks would be louder than the engine’s roar… these things are loud.

It was also very interesting to see how small the IS-3 was compared to the other heavies; however what it lacked it size, it made up for it with smoke… the engine was belching white diesel exhaust like nobody’s business.

As I said it was really hot. If I recall correctly, the Centurion actually had to wait in the arena a bit so it cooled down before it could go back to its parking spot.

I probably should have taken a couple of videos, too, but I wanted to enjoy the show. When you are taking photos, you already focusing on something else; I did not want to compound the issue with switching between photos and video, too. Probably should have given the camera to my ever patient wife, but she was actually enjoying this part of the festival.

There were people dressed in historical uniforms, actual tankers, and tank restorers mixed with us, mere mortals.



Later in the afternoon there was a demonstration of infantry-tank tactics in WWII. An M4 was attacking a German position with a PnzIV defending, but since it was only a rehersal, the soldiers were just strolling next to the tank. This, and the lack of pyrotechnics made the show distinctly uninteresting…

Needless to say, we did not mind the short program. The interior of the museum was really inviting with the airconditioning on.




Tankfest, 2018, part 4. The Tank Restoration Area

Well, this is one of the most interesting areas of the museum, and if my information is correct, it is normally closed for the public. Except on Tank Fest!

Lots of spare parts, lots of tanks and other vehicles in various states of direpair… things you can’t usually see: T14 Heavy Tank, Conway tank destroyer and many other vehicles I have only heard about.

The only problem was room: it was difficult to squeze through the tanks and take half-decent photos. The exhibit is also so very useful as a reference for scratches, faded paint, paint chips, oil stains, dust and rust.



Wargaming set up a World of Tanks event here: you were allowed to play thirty minutes on a press account, and you got a code for a Churchill III, a T-shirt, and a backpack. (Not very sturdy ones, but still.)

I managed to try the FV4005 (presently grinding for it), and the Defender -to see how OP it is. In my hand it was not very… Unfortunaltely I had no time to try the rare, or never released tanks also in the garage of the account.

Oh well.


Keep an eye out -more photos are incoming.

Tankfest, 2018, part 3. Tigers and Panthers




The Tiger exhibit. Lots of Tigers…

Tiger 131




Tiger II (Henschel turret)


And finally, the Panther (which is in another part of the exhibition)


Tried to take photos of scratches, oil leakage and damage. (Obviously they are museum exhibits, but they still can come useful.)


Keep an eye out -more photos are incoming.

Tankfest, 2018, part 2. -the cutaway tanks

A cool exhibition of a Centurion cut in half, along with a somewhat corny video of a tank maneuvering and shooting on the range.

A cutaway T-55… this is something I’m definitely going to do. I mean I did try to do one before, but I always held back of fear of ruining the model. Not any more… The new MiniArt T-55A Mod 1981, here I come. (I really like the idea of cutting away the side of the hull by the driver.) There are other examples, too, for inspiration.

Assorted thanks sitting around. Black Prince, Comet, Archer, Panzer IV, The Penis Tank, and the rest. A WoT wet dream.

An armored plate with some projectiles sticking out…



Keep an eye out -more photos are incoming.

ACE Model 1/72 FV4005 Stage 2 – part 2.

Part 1


Well, the painting of the beast has arrived.

I’ve chosen a tricky pattern which I already attempted with my Cromwell (not to much success). This is one of my favourite World of Tanks camo schemes from the British branch.

It took a while to figure out the best way to replicate the pattern. After priming (Vallejo German Grey) I painted everything in the pale greenish color which will be forming the large patches (a mixture of Tamiya JA Grey and dark green). Once it dried I added patches of silly putty, and painted everything in Tamiya JA grey – this will form the thin line between the green and the black.


After it dried, I carefully squeezed the sides of the putty patches to spread them out a bit- this covered the thin areas of the grey color. Then I sprayed the model with the priming color lightened with Tamiya JA Grey. (Using the same color to lighten all the camo colors tie them together well.)

I have to say the results turned out to be better than I expected; although I did have to touch up on some of the patches.

As usual, a couple of layers of green and ochre filters helped to blend the colors together, and I sprayed Future on the model to provide base for the decals. (There were only three decals provided; apparently there should have been a “Spud” marking, too, according to the instructions, but it was missing.)


Once the decals dried, I sealed them with Future, and applied a dark pin wash to the model. After about a day of drying I used a wet brush to remove the excess, forming some good-looking streaks in the process. Wherever I felt there was too much wash left on the surface of the model I used a flat dry brush to remove it. I repeated the same process with dot-filters; the browns, yellows and blues formed nice, faint streaks on the sides of the vehicle.

Using a 00 brush I painted discreet chips on the tank. The color German Black Brown by Vallejo is great for deeper chips where the metal is showing through. I tried not to go overboard; in this scale no chips would be visible in reality, but they do give some visual interest to the model. I also used sponge chipping on the barrel and larger surfaces – again, trying my best not to overdo the effect.

This is when I painted the tracks and the rubber rims of the roadwheels with a fine brush- again I used very dark greys instead of black.

I rusted up the exhaust: on a black base I deposited a bright, rust colored pigment (Humbrol Rust), which was treated with various dark colored wash unevenly to create patches. The end of the exhaust and the mud guard below it got a tiny bit of black to represent soot; I tried not to go overboard. The thin metal sheet that forms the exhaust guard got a really heavy chipping treatment. Because of the constant heat coming from the exhaust pipes this thin piece of metal would be constantly heated, which promotes heavy oxidation.

I made a very light slurry of a reddish rust colored wash, and applied it over the larger chips on the barrel and the exhaust covers; once dry I could adjust the effect using a wet brush. (When I use the term “wet brush” it means a brush dipped into the appropriate solvent dabbed onto a piece of rag.)  I added extra heavy layers on the exhaust guards. Later I adjusted the effect with different rust colored paints to make this piece look even more oxidated.

I always liked the dusty look of some of the tanks in World of Tanks: a very light colored dust layer covering the lower parts, which gets fainter and fainter as we go up the hull/turret. I dabbed “Dust Effects” by AK Interactive onto the upper part of the superstructure and the turret with a brush; this product has a very light color – too light for an European setting I think, but very close to the color from the game. I left it dry overnight (it looked horrendous, causing me no small worries), and in the morning (during my morning coffee) I adjusted it with a wet brush (using white spirit). It formed a layer similar to the effect seen in the game, but I could not make the transition completely smooth; for this I would have to airbrush the product. (I know it’s possible, but I’m reluctant to airbrush non-water based paints.)

The lower chassis got slurry of light brown pigments suspended in Mig’s neutral wash. (I have no idea what I should be using this product for, so I use it for making mud).  It creates a dark grey/brown effect used in conjunction with the brown pigments, which is very similar to actual mud in many parts of the world. The excess was wiped off once the mixture dried, and I repeated the process with a darker mixture on a smaller area to form layers of dry and fresh mud. I covered the upper parts with a sheet of paper, and created some mud splashes flicking a brush loaded with the mud-mixture. The tracks got some extra treatment of mud.

To lighten the colors a bit -and make the model look more realistic- I sprayed flat varnish onto the FV.

As a final step I rubbed a silver pen on the tracks and the edges of the model to simulate the shine of worn metal, and called the model finished.

To honest I’m quite happy with the results; despite of the issues coming up while building the model, it turned out to be a good project at the end. Let’s hope the in-game tank will also prove to be a pleasant surprise once I get there. Which should be about 200 more games…

ACE Model 1/72 FV4005 Stage 2 -part 1.


This has been one of those vehicles I would never have learned about had it not been for World of Tanks. It looks weird with the giant turret, which immediately makes it attractive. This and the fact that it has recently been buffed in-game made me decide to grind it out (a long commitment, and my first would-be tier X tank). In the meanwhile I’ve got the model to build.

There are not many models available of this vehicle, which is not surprising. British armor has been neglected by companies, and experimental British armor doubly so. Apart from this version, there’s a Cromwell Models resin kit out there, and that’s it as far as I know. It was really good to find a plastic version available -it’s both cheaper and easier to obtain than a limited-run resin model. Since Ace has a line of Centurions, it was not a big investment to make this weird-looking tank destroyer into a model; and good for them (and us) I would say.

The model is by no means perfect, but it’s OK. The detail is soft at places, and the fit is, well, hit-and-miss. The instructions could use some improvement, and the sprues are not always labelled correctly. The model also has rubber-band style tracks, which are less than ideal; I prefer the plastic alternative. On the other hand these issues are not deal-breakers; it is just a warning that it’s not a shake-and-bake model.

The kit does come with some PE, and it considerably improves the model. Once you’re finished it’s not a bad kit when it comes to detail; in fact I am quite happy with it. (I did take a short-cut: because the side skirts hide most of the running gear and the tracks, I was not very careful building them -which considerably improved the building time. Since it’s not visible, no-one has to know, right?) The tow-cables are not very good (the moulding is not perfect), but I’ve decided to use them for the review.

Most of the gaps were easy to fill in with putty. The one in the front, however, is a contentious issue; and this is the one issue I did not like about the kit. I tried to fill it in completely so it would blend the top of the hull and the frontal plate together, but the step between the front glacis and the top was too big. The hatch detail on the top was too close to the edge so I could not trim it to shape it to the front armor. Unfortunately there is still a visible step remaining (which kind of looks intentional, so if you don’t know the type you may think it is a design feature). The other big fit issue was the mudguard: the front parts just could not be fitted without a major surgery, so I just left them off. Battle damage.


Now the model is finally done and ready for the paint. The only question remains: which non-historical camo pattern I should pick from the game?


Modelcollect 1/72 E-75 German heavy tank with interior

As an introduction I have to admit that I love models featuring their interior. (The blog is full of these models…) If I can, I buy aftermarket sets to enhance my models, and obviously I was overjoyed by the recent influx of tanks with full interior by several manufacturers. Modelcollect has been on my radar for a long time now, because I do like to build post-war Soviet armor/trucks, and I also like that the 1/72 scale Modelcollect kits usually come with PE and metal barrels, which is really unusual -and amazing-, and more importantly, I like their prices. When I saw that they were working on a series of tanks with interior included, obviously I became very much interested indeed. I kept checking their online shop to see when these tanks become available, and when the E-50 and E-75 finally did, I immediately went and purchased the E-75.

The first thing I received was a sprue of the top of the hull. That was all I got in the cardboard box, and there was no explanation included. This made me worried for a while as you can imagine, but it took me just an email to clear up the situation: Modelcollect sent out replacement sprues for all the E-75 they sold. Exceptional customer service I’d say. (The reason, as far as I could determine, was that the top hull was somewhat damaged in the original sprue – the back of the engine compartment is a thin plastic strip, and it was bent a little in my sample. Other than that I could not find any differences between the original and the replacement.)

The tank itself is a paper panzer: it never got further than the planning phase. It was planned to use a lot of the Tiger II components, and looks remarkably similar to it. I suspect the model’s interior was designed using the Tiger II as a template – after all German tank designs were quite conservative during the war, so it is a safe bet from Modelcollect. The model is packed in a somewhat thin cardboard box; the box art is a technical drawing of the tank against a black background.

The kit comes with several extra parts you will not use during the building phase; an extra lower turret, two E-50 turrets, and a lot of smaller bits. (This seems to be the case with most Modelcollect kits; my spares box has been filling up lately from the leftovers of the three models I’ve bought.) The introduction on the instructions are taken from the wikipedia page of the E-50. (A mistake obviously.)

The instructions are provided as a foldout on high quality, glossy paper. The steps are outlined well and look clear, but during the building phase I ran into a couple of issues, which I will highlight over the course of the review. None of these issues are deal-breaking, but they did cause me some headache; however if you know about them you will have no problems whatsoever during the build. (I guess this is one of the reasons to read reviews.)

The model also comes with a very large set of PE: apart from interior details and a lot (and I mean a lot) of round disks for the bottom of the ammunition, we also get the back and front mudguards as optional PE parts, and the track guards are included as well. A lot of the PE is not used for the build; I’m honestly not sure what they are for. It’s an intriguing enigma. There is also a small fret for the engine deck grilles, periscope covers and lifting hooks. A third tiny PE fret is also included, which is not used at all. (And not included in the sprue layout section of the instructions, either.) Another mystery; if anyone has the answers, please let me know in the forum. There’s a nice-looking crew included if you want to place them inside the tank; the detail is not as fine as some resin offerings’, but they are still pretty good. The plastic is somewhat fragile. The parts are finely cast, but there is some flash (not a lot), and the detail is OK, but not exceptional.

The interior is not too detailed, unfortunately. I know I’m asking for a lot here, so take this criticism with a grain of salt. The basics are in, but there is a lot more that could have been done. The detail from the firewall is missing completely, and the radio-operator’s station has no detail at all. The seats have no moulded-on detail of padding, and the turret is missing a lot of things (fume extractor, electrical boxes, etc.). Obviously this is a 1/72 scale kit, so the expectations need to be adjusted a bit, but I still would have liked to see a more comprehensive interior. If you plan to build the tank with only the hatches open most of it will be invisible, so it may not be an issue for you -but then why not buy the cheaper version with no interior? I built the model as a cutaway, so for me the more detail the model has, the better. My impression is that originally the tank was not planned with an interior, but it was added to it later. The interior sides of the larger parts (hull, turret, etc.) have no markings where the different interior detail should go, and some hatches are moulded shut. A lot of the PE options look like an afterthought, too, and sometimes surgery is necessary before installing them (I’m thinking of the front and back mudguards mostly).

The first step details the addition of extra track links to the turret; I would leave them off until after the painting is done. The teeth are supposed to be replaced using PE replacements; I’ve left them as they were. (The instructions are not clear about removing the plastic teeth, and they are tiny anyway.)

The second step assembles the turret basket (very nice PE plate), and the third finishes off most of the turret interior and the gun. This is where you run into the first issue: the metal barrel should fit onto a small peg on part A6- but there is no hole drilled into the metal. I cut the peg off and tried to glue the barrel to the plastic base as straight as I could; it’s still a bit wonky if I’m honest. Only after painting -when I was putting the leftover bits into the spares box- did I realize that we actually get a proper mantlet that can fit the metal barrel (A9 instead of A8). This is a recurring problem with the instructions- they seem to have been designed for an all-plastic model, which was modified later to include PE, metal barrel and interior. Unfortunately not all the modifications made their way into the instructions; some did, but this particular one, for example, apparently did not. Regardless now you know, so you can use the correct part.

There are two turret bases included, but the instruction does not give the part number, so I have no idea if I used the right one. This is again a tricky issue. The turret ring on the hull does not have the holes for the interlocking pegs normally moulded onto the ring of the turret itself. These are very well known features of almost all tank models: this is how the turret is locked into place. Upon inspection you will find that one of the turret bases has these little pegs, while the other does not. The latter one would go better with this model, but at the end of the day it makes little difference which one you choose to use. Obviously I used the ones that had them as I did not notice these differences during the building phase…

The turret bottom has moulded-on holders for the gun; these are unnecessary, since the gun comes with its own support-and these details are not featured in the instructions, either. (You just have to cut them off.) Where the gun goes exactly is not marked anywhere, unfortunately; I used the location of the holding pegs I cut away to attach the gun.

Step 4 finishes off the turret exterior: hatches, lifting hooks and everything else. Unfortunately the back access hatch cannot be displayed opened; and the loader’s hatch can only be opened about 90 degrees, because the fume extractor housing is in the way.

Step 5 and 6 work on the upper hull and engine deck: you have an option to cut off the moulded-on mudguard, and substitute it with a PE one (tiny PE part alert). There are also PE guards supplied for the whole length of the tank; this is really nice if you want to show them damaged, bent or missing. I would not add them to the hull at this stage, though -wait until you finished the hull and running gear. (There are no markings where exactly should the tools, towing cables, trackguards go.) The engine deck has nice PE grilles.

None of the engine access hatches or the driver’s/radio operator’s hatches can be opened; this is a shame, since you do get an engine compartment and a driver’s compartment. Unless you are building a cutaway these details will be invisible once you finish the build.

Steps 7-10 detail the assembly of the running gear/tracks. The process is quite easy and straightforward. The E series was not planned to use torsion bars; the special spring suspension is nicely replicated. The positions of swing arms, however, are not very obvious. You can move them up or down, hence adjust the road wheels to any terrain, but the “neutral” setting is not very clear.

The kit comes with link-and-length tracks, which is a very good option for this scale. The links are left and right handed; something the instructions do not say or indicate. You should sort the track links first and then start with the assembly. I cut off the connecting pins from them because it was easier to assemble them (they are a bit clunky and don’t fit very well into their grooves). The number of links necessary for the tracks shown on figure 10 is not correct; you will need at least five extra individual links to finish the complete track.

Step 11-12 shows the assembly of the engine compartment. There is some flash on the lower hull which needs to be removed. The basic layout is created by parts H18 and H4; there are no guiding grooves within the lower hull to help you with the placement. (It’s not difficult to find the correct position, but it would still be nice to have them. The engine is quite detailed little thing, and once finished the whole engine compartment looks pretty good. Some larger pipes can be scratchbuilt if you are so inclined; overall, it’s a really good representation of the real thing in this scale. The problem is that none of it will be visible if you close the engine deck, since the access hatches cannot be displayed open.

Step 13-15 details the assembly of the interior. It is somewhat basic, but generally enough in this scale. The radio operator’s station in quite neglected as I mentioned; if you plan to do a cutaway, best use the driver’s side, or work on your scratchbuilding skills. To make painting easier do not yet glue the bottom of the fighting compartment into the hull; I did, and it made painting somewhat difficult.

Step 16 shows the assembly of the ammo racks; depending on how you want to display the tank you may not need to bother with all the PE disks for the ammunition. The place where part J8 should be placed is not marked on the hull.

Step 17-19 show the assembly of the back armor plate of the tank. The detail is pretty good, but I’m not sure the suggested sequence is correct. You have an option of using a PE mudguard; for this you need to remove the moulded-on plastic part. The instructions would have you attach all the small parts to the panel and then remove the plastic mudguards. Performing this surgery first, and then adding the protruding details might be a better way of doing it. I would also glue the panel to the hull before adding the smaller bits; the fit is tight, and it takes some fiddling to slot it in place. (I generally prefer finishing off the large assemblies first, and then add the details to minimize damage later on; this means I’ve installed this part when I was finished with the tub of the hull and before I installed the interior.)

Step 20 is the final assembly. The top of the hull does not fit perfectly to the bottom which necessitated some sanding on the sides of the lower hull to achieve a good fit. As mentioned at step 1, the turret ring on the hull is perfectly circular; there are no notches that would allow the turret to lock onto the hull. This may be annoying to some, but I think it’s actually a good thing: it allows you to display the tank with the turret off, without having to make those notches disappear. It also means that nothing keeps the turret in place if you don’t glue or magnetize it.


Once the assembly was done I’ve chosen a hypothetical (and funky looking) camo pattern; I did not like the plain dunkelgelb suggested by the assembly. I tried to make weathering as realistic as possible: as usual I applied some filters to “unify” the colors, and after washes, I painted paint-chips, scratches and rust streaks onto the tank. The streaks were done in several layers in several colors: from blackish to rust, representing dirt, dust and rust streaks. As a final step I dabbed some pigments on the horizontal surfaces to simulate dust.

Overall the detail is good, the subject is great (depending on your preferences, of course), and the interior is a very welcome bonus. What really lets the model down is the instructions; as I pointed it out several times they are not very good at certain steps, and at others they are flat out wrong. This is not a deal-breaker; especially if are aware of the weak areas. The model, as I mentioned, was improved from an all-plastic version. The design of the “base” pieces, the several extra parts, and the somewhat mangled instructions all seem to point to this direction. There is nothing wrong with improving existing models; I just wish the instructions were improved to the same level as the model itself was. It is certainly not a bad model by any measures I have to add; in fact I quite like it, and I’m really looking forward to building the T-80 I have in my stash -and the T-72 with interior still to be issued.


To sum up: what can you use this model for? As I mentioned it a couple of times already, if you just build it out of the box, most of the interior detail will not be visible. In this case you are better off ordering the non-interior version. (This is a very good idea MiniArt seems to be adopting, too: a budget version for most people, and a “premium” version with interior for the more unhallowed model builders.)

The interior version is a very good option if you plan to build a damaged tank, or a tank under repair. For these purposes this model offers an incredible deal, since it is relatively inexpensive, and has enough detail to showcase it with the turret lifted off with a crane. If you want to add more detail, you can use the Tiger II as a guide and either scratchbuild the missing detail, or adopt one of the aftermarket resin interior sets available for the Tiger I. I think Modelcollect could have gone a bit further with detail even if it means an increase of price: after all, there is a cheaper alternative available, and this was always going to be a niche product, so why not go all the way? Regardless if would like to build something special; this is definitely a good model to grab.