Tag Archives: STALKER

Tamiya 1/35 T-62 with Verlinden damage set p3.


The first part of this build can be found here.

Second part here.

With the major building and painting finished, it was time to put the tank into context. Well, into a scene, that is.

I buy large plastic cases to keep my models in; they are excellent for display, protection against dust and curious fingers, and also make it easy to transport the models. In some cases I use them as small dioramas.

In the second part the tank was reasonably finished, but it was still somewhat uniform, despite of the layers upon layers of paints, paintchips, oil paints, filters and pigments. Now was time to bring out the sponge…

The technique is reasonably simple: dab the sponge (or the scrotch brite) into the paint, dab most of it off on a piece of paper, and then keep dabbing it against the surface you wish to cover with paint/paintchips. (Depending on the amount you cover you can depict paint chips or flaking off paint.)

I’ve used the external fuel tanks to experiment; unfortunately the box was not long enough for these to be mounted onto the tank…

First, I’ve used the sponge technique to make the uniform brown surface into a rusting, multicolored one.

Second step: using light green I repeated the process. (This color is excellent for paint chips, too.) It’s not a problem if it’s too light at this stage; in fact, it’s actually necessary- the subsequent washes, filters will darken the color anyway.

And finally, the result: I’ve used overall brown washes, which created a grimy, used look. Some more green was dabbed onto the barrels in a much smaller area, and voila – we have an interesting, rusting surface with different shades and colors.

The tank was glued onto the base using two part epoxy (it’s quite heavy because of all the resin and metal), and then I used Tamiya’s soil Diorama Texture Paint. (I’ve got it discounted when the largest hobby store chain in the UK went bust a couple of years ago.) The color is not exactly great, but we’ll help it a bit later using the airbrush.

Using the sponge method I’ve added green patches onto the turret and the front part of the tank- I wanted to achieve a color difference between the front and the back.

The paint was toned down with some brown filters.

I’ve used the leftover tracklinks from the MiniArt T-54-1 for the tracks; a lot of them don’t have teeth, since they are the special links for the ice-cleats, and they are also narrower than should be, but to be honest I did not want to spend money on extra tracks. Nobody will notice, unless they read the text.

I’ve bought some AK Interactive products online cheap (six bottles for twenty quids) – rust, different colored streaking products, washes, and one that simulates algae streaking… so I used this tank to try them all.

I’ve used more rust pigments on the turret and the side of the hull, and used a dark brown filter to tone down the contrast a bit. Black pigment was used sparingly to depict soot (my fiancee’s insistence)  The way I use these pigments is to load a brush with Tamiya’s flat varnish, dab it into the pigments, dab most of it onto a piece of paper, and then dab it onto the surface of the model. You want to have some in the brush, but not too much; kind of like a heavy drybrush.


I’ve used some wine by Eduard to depict a creeper growing out of the driver’s compartment. The fallen leaves were made using the actual seed pod of a tree. Unfortunately I can’t figure out what it’s called; it looks like a fat caterpillar, and when you grind it up between your fingers, it falls apart into Marple-leaves like parts, and seeds. I mixed some white glue and water, added this plant material, and distributed onto the tank.




Last part is coming next week with the vegetation and the STALKER dude added

Tamiya 1/35 T-62 with Verlinden damage set p2.

The first part of this build can be found here.

The tank needed to be burned out and rusty- something that stood abandoned (and looted) for years. I took a lot of liberties with the amount of rust and weathering -this degree of decomposition would only happen after decades. It’s an interesting point in our hobby: we tend to overemphasise the damage, the chipping, the rusting on most of the AFVs we build, which makes them interesting to look at, but quite unrealistic and out-of-scale. The point is: it’s not meant to be an exact replica of the real thing, it’s only a representation of an idea.

The idea here is a tank that had a catastrophic fire in the engine compartment, so it was abandoned in the Exclusion Zone around Chernobyl. (I wanted to use the STALKER figure, so it had to be Chernobyl. I could not come up with a realistic scenario why a T-62 would catch fire there, though, so you’ll have to use your imagination.)

Anyhow: after spraying on a base-coat of different rust colors, I proceeded to coat the tank with AK Interactive heavy chipping medium, and some NATO green from Tamiya. Once it was dry to the touch I created areas where the paint was worn off to differing degrees: more on the back and on the thinner metallic parts, and less on the front, where the fire did not heat the hull up that much.

Once the chips were done I sealed everything with varnish.

I put the tank onto the base of the display case I intended to use and realized that it was too long for the external fuel tanks to be mounted… I could have turned the turret around if I had not used epoxy glue to stick it onto the hull… Oh well, more battle damage.

I’ve used ochre and dark brown filters on the whole of the vehicle, and some burned umber washes to deepen the shadows in the crevices.

I’ve glued the tank onto the base using epoxy glue, and mixed some sand with plaster to create a rudimentary terrain; this will -hopefully- be refined further. (As soon as I get some replacement tracks for the tank, of course.)

While we’re waiting for the groundwork to be finished, I went on to further enhance the rusty feel for the tank: I used three different colors of iron oxide (it comes in brown, red and yellow, and dabbed it on using a brush and some flat varnish.


I’ve also tried Lifecolor’s rust wash set to see how it works; I suspect an airbrush would be a better way of handling it. (It is not easy to use. Well, it’s easy to use, what’s not easy is to get results like you see on the cover. Unfortunately there’s no real guide provided.)
They suggest glossy surface, however it tends to form droplets which is not ideal. (Surface tension is not always useful.)

I’ve checked out the storage box on a museum Shilka, and it was pretty much pure rust… so this is how the tool boxes will look once I’m done with it.


Some more rust over the burned areas will also be necessary, and also soot. It’s a good question how much soot actually remains after years of being subjected to the elements, but this will not deter me from adding some. In fact I’ve long been wanting to add white soot left over from the burning rubber rims of the roadwheels. I’m fairly certain this would be washed away by the rain in a short order in real life, but I shall not pay attention to this issue.

Anyhow, this is how it is as of now. Keep tuned in; updates will be coming (soonish).