Tag Archives: photoetch

Modelcollect T-80UE part 2.

Well, the painting phase arrived finally. (To be honest I always have several models stuck in this phase because it takes time to set up the paintbooth. This is the bottleneck of my model building process.)

There was also an accident involving this tank. Do you remember I talked about the necessity of gluing the turret in place in the first part? Well, it was not glued in at this point -and I successfully knocked off all the PE shields from the front of the turret on one side. My most valued and cherished wife found three of them; I replaced the fourth with a part I fashioned from aluminium foil. (I can’t tell how much I appreciate my better half, by the way. She tolerates my hobby without a complaint, and even helps me finding parts that flew off into the big empty.)

Once the disaster was averted, I sprayed dark grey Vallejo primer on the model. I gave a day for the primer to dry, and then sprayed Tamiya Buff. I looked at several photos and this color looks very close to the actual vehicle’s basecoat. The green patches were sprayed on free-hand. The green was lightened considerably with the base color. I was contemplating using masks, but the model is full of tiny protruding details -something all masks love to pull off in my experience. I used a relatively low pressure, and kept the gun close to the model; I found the process pretty easy to control, and simple to do. There was minimal overspray; the demarcation lines between the colors came out pretty good.

The last step was to paint the black lines and patches by hand. I used a dark grey color rather than pitch black to account for the scale effect.

As usual, a couple of layers of ochre filters helped to blend the colors together, and I sprayed Future on the model to provide base for the decals.

There is also a very extensive decal sheet provided; the painting guide only offers one option with minimal decals, so it’s probably a comprehensive sheet that Modelcollect uses with all their Russian armor. (Will be useful for my W-Models Pantsir build.)

Once the decals dried, I sealed them with Future, and applied a dark pin wash to the model. After about a day of drying I used a wet brush to remove the excess, forming good-looking streaks in the process. Wherever I felt there was too much wash left on the surface of the model I used a flat dry brush to remove it.

I gave a week for the wash to dry, and sprayed a flat coat over the model. I’m always a bit anxious at this step as this is where you see what the model will look like; the flat varnish makes the colors lighten a bit. I painted the tracks and the rubber rims of the roadwheels with a fine brush- again I used very dark greys instead of black. Using a 00 brush I painted discreet chips on the tank: the side-skirts got heavier black chips (since they are made of rubber). I also used the base color on the green parts for light damage, and Vallejo’s German Black Brown for deeper chips. I tried not to go overboard; in this scale no chips would be visible, but they do give some visual interest to the model. I also used sponge chipping on the barrel and larger surfaces – again, trying my best not to overdo the effect. I added some rust washes on the larger areas where chipping was more prominent; once dried I adjusted the effect with a wet brush.

I applied dust-colored pigments to the lower parts of the hull a very diluted dust mix on the top part; again I readjusted everything once dry. The exhaust got a tiny bit of black; I tried not to go overboard.

As a final step I rubbed a silver pen on the tracks and the edges of the model to simulate the shine of worn metal as usual.

Overall the model is excellent; I can wholeheartedly recommend to anyone.

Modelcollect T-80UE

x207
In the last couple of years Modelcollect quickly gained a reputation for producing good quality models of Cold War Soviet vehicles -and “1946 Alternate History” type of German panzers. (E-75, weird walking tanks, hypothetical AAA tanks based on the E-100 chassis, the P-1000 Ratte in 1/72 (!), etc.)

I always liked how busy modern(ised) Soviet armor looks; since they are quite small, the exterior is really busy with all the equipment could not be fit inside, and the constant modifications, extra armor and sensor equipment also add to the unique look.

This is my third Modelcollect build; and the first one that does not depict a somewhat esoteric vehicle (meaning: it actually exists).
The build was an easy and quick one. Since there are several versions of the T-80 offered, the model is full of extra parts; I was very happy to see an armored shield for the commander’s hatch included, which I will add to an older T-72 build.

The only issue with the turret is that it’s quite loose in the turret ring; this combined with the heavy metal barrel means you’d better off gluing it into place because it will rotate quite violently when the model is moved. The rubber protector flaps for the turret ring are made of PE, which is very nice: you can fold them a bit to make them look more realistic. (They are best installed after you fixed the turret in place; there is very little clearance between the hull and the edges of these flaps, so you can knock them off easily if you move the turret.)

The lower hull went together fine, since the fit is very good, and the running gear is actually easy to assemble. I chose to add everything -tracks, return rollers, idlers and drive wheels- before painting. This means I will have to be careful to paint the rubber rims and the tracks with a brush, but it also simplifies the assembly. The tracks are very good – the pieces fit together like a dream.

The two mudguards are pretty elaborate pieces of plastic; most of the detail is moulded-on. It’s not readily apparent that the rubber side-skirts are, in fact, made of rubber. They looks like massive armored slabs. The 1/72 Revell T-72 has very well done side-skirts in this respect; and to be fair to Modelcollect, even newer 1/35 scale tank models have these side-skirts moulded straight as if they were made of metal plates.

The PE engine grilles are excellent, and really improve the look of the model; and the PE lamp guards are also pretty impressive. (And, more importantly, easy to assemble.)

The holding brackets for the external fuel tanks are somewhat flimsy (it’s difficult to determine what goes where), but using a little patience and checking a few reference photos it’s not hard to install them correctly. The un-ditching log has a very nice wooden texture.

And that’s it – the building was a breeze. (I was watching documentaries with my wife while building the tank; it took me two evenings altogether- about four hours total.) Right now I’m contemplating the best way to go about painting it, but since it looks really impressive with all that shiny brass, I decided to leave it like this for a while.