Tag Archives: light tank

Dnepromodel 1/35 Straussler V-4 part 2.

EnnTe7p

First part

I mostly used acrylic paints and Vallejo weathering products because due to a small human cohabiting with us since the end of December, I need to limit the usage of stinky, dangerous stuff in the house. (I do make sure there is an appropriate separation, but one can never be too careful.)

 

I wanted to depict a brand new prototype after a long day out on the proving ground -so lots of mud, but not much rust and fading.

I used Vallejo’s primer to prime the model, and a mixture of Tamiya greens to give the base color. (I don’t really know of any accurate color reference charts of pre-war Hungarian colors, so it’s a free-for-all.) I used Tamiya’s transparent green and yellow as a first round of filters (wanted to see how they work ever since I’ve read about them a while ago).

 

I also used several of AK’s filters on various parts of the hull to create hue differences. I used different oil colors as well for filters (dot method), and blending -you can see the results on the back hatches especially. All this helped to create visually interesting differences in the otherwise uniform green finish.

 

Instead of turpentine or white spirit I use Zest It as a diluent; it’s still not ideal, but better health-wise.

I bought a bunch of Vallejo’s weathering products: industrial thick mud, dust and oily mud washes, mud splashes, etc. They have the undisputed advantage of being water-based, so I can use them without worry to anyone’s health. I used the mud as a base, and stained it with pigments and paints, applying them in layers, and washing them back a bit with a wet brush to adjust the effect. (There are several mud colors, but I only bought one because I’m cheap.) A Tamiya mud weathering stick added some more hues of mud. (Just dab on, and adjust with a wet brush.) I used a silver pencil to bring out the details on the tracks, and to highlight the edges of the superstructure.

 

Overall this is a nice model. It is by no means perfect, but the result does look good, it’s not overly difficult to build (this is my first 1/35 resin model), and it is quite an unorthodox little vehicle which is relatively unknown and has an unique look. I really enjoyed the build, and since the tank has an intriguing history I am quite happy to put it on my shelf.

Advertisements

Dnepromodel 1/35 Straussler V-4 part 1.

h6avnzb

This is a very odd-looking tank from the interwar period, and it was the first (and only) original Hungarian tank design, the rest being either licence produced (or based on licences bought from other countries) or simply purchased.

History

The Straussler V-4 came as the further development of -surprise- the Straussler V-3 light tank. The V-3 reached to the prototype phase in 1936 when the decision was made to further improve it due to several shortcomings. V stood for “vontató”, that is “tractor” in English. (A specialised vehicle for towing, not for agricultural work.) The designer was Nicholas Straussler, a Hungarian entrepreneur, engineer and inventor living in Great Britain, who also developed the flotation system on the DD tanks, the Alvis Straussler bomb trolley, and the AC2, AC3 and M39 Csaba armored cars among many other things before, during and after World War 2.

The V-4 arrived at a very tormented period of Hungarian history, and a period of fast changes in tank design philosophy which explains its eventual failure.

After the First World War, Hungary was forbidden from most modern military technology, so any research and development had to be conducted in secrecy. The treaties also severely limited the options of the Armed Forces in acquiring military hardware or know-how. Nicholas Straussler was a Hungarian ex-pat living and working in the UK, who still had strong ties to his old country. He was an enterprising and prolific engineer who not only had his own firm producing his designs, he also sold them for several large UK companies. He designed and offered the V-3 light tank (which was a medium tank in Hungarian nomenclature) for the struggling Hungarian Armed Forces. The tank was to be produced by Weiss Manfred Steel and Metal Works, a Hungarian company. He envisioned the tank being built and exported to the UK and other interested countries which would have bought economic benefits to Hungary as well. This arrangement was mutually beneficial: it helped him cut the costs of producing the first tanks considerably compared to the costs of production in Great Britain. The development and production of V3 went under the name of “towing tractor” to circumvent the treaties’ limitation, and were produced without armor, armament and turret. They were to be equipped in the destination countries, which would have satisfied the letter of the peace treaties (somewhat).

The V-3, and its development the V-4, were planned to be small, amphibious light tanks utilising dual-drive, meaning they could be driven with and without the tracks on. This concept was all the rage back in the ‘30s, so we should not judge Straussler for jumping on the hype train. The V-3 utilised an unique suspension system developed by Straussler himself. This was further improved on the V-4 by adding return rollers which were used to adjust the track tension, as the original design was very prone to either break or throw a track.

The running gear had two powered large wheels on the front and back, and two smaller roller wheels per side These were connected by a three piece horizontal rocking arm (apologies; not sure if this is the technical term). The suspension was provided by two torsion springs per side, which did provide a very stable platform for the weapons at slow to medium speeds, but at high speeds they were stiff, resulting in an exhausting ride for the crew. The V-3 had no track tensioning. The tank had a detachable screw and two pontoons for amphibious operations. (Both the V-3 and V-4 have shown excellent aquatic capabilities: they could steer well, and were very stable and safe on water. The only problem it had was exiting the water if the terrain was not perfect for it, which is, let’s face it, not ideal for a tank.)

The V-3 was not a successful design; the multiple and conflicting specifications (ability to use wheel-only locomotion on roads, amphibious capabilities, 45km/h top speed on tracks, etc. etc.) ensured that the tank was suffering from reliability issues, and was not able to fulfill each and every specification. In road mode the tracks could not be mounted onto the vehicle, so they had to be transported by a different vehicle. The tracks themselves were too narrow, which decreased the ability to cross difficult terrain, and stressed the rubber rimmed roadwheels. At this point the tracks were simply moved by the friction between the rubber and the tracks, and no drive sprockets were present. The improvements on the V-4 transformed the tank into a much more reliable (and heavier) vehicle armed with two 34/37M 8mm twin machine guns and a 40mm 37M main gun. Since the Armed Forces had no other viable alternatives, initially they were very much interested in the tank, and were willing to look over its deficiencies. (Beggars can’t be choosers I guess.)

The Swedish Landswerk L-60 was also tried alongside the V-4, and the military imagined these two being used alongside each other. However the V-4 was still plagued by mechanical issues, it did not have a very good off-terrain capability, despite of the radical redesign of the hull, and the international situation changed sufficiently for the Hungarian Army to declare its intentions of rearmament openly, so they could pick and choose from a much wider range of options. These factors doomed the V-4’s chances of being accepted into service. The Hungarian Army considered several alternatives with the second production version of the V-4, and decided on purchasing the licence for the production of the L-60, which became the Toldi I after some further development. Straussler and Weiss Manfred did not give up; both the English and the Russians were interested in the type for a while. (The tank was also trialled in Italy in 1937.) There was an export version produced with a large radio aerial around the turret, and later Straussler designed several smaller tracked vehicles aimed for the Russian and British market with the suspension developed for the V-4’s.

Further reading:
An article about Straussler and a paper-panzer that has never been built:
The Straussler MBT – Hungarian tier 10 candidate

Plans for the drive train:
https://patents.google.com/patent/US2089042

 

The Model

The model arrived very well packaged; there was no damage at all after its two thousand kilometer journey to me.

I have to say the presentation of the model is exceptional. All the parts are bagged -sometimes individually, sometimes with a few others- , and the bags are labelled with the part numbers. This definitely makes assembly easier and more organised, compared to other resin kits I’ve built. Even the tracklinks from each side are bagged separately, which is necessary, given they are not identical. The V-4 had left and right handed tracks, so keep this is in mind when assembling. Having resin individual tracks is a bit bold since gluing them together is not as straightforward as with the plastic individual tracks. (With plastic you have at least half an hour, hour to adjust the tracks after gluing them together; you lose this option with CA glue.)

Some larger parts (boogies of the suspension, etc.) are still on their casting blocks, and the attachment points are very thick. Cutting them off will require some finesse and care. (Also, constant awareness of the health implications of working with resin. Resin dust is toxic, so work somewhere where others are not exposed to it, and wear a respirator. Alternatively use wet sawing, wet sanding techniques; the water makes sure the forming dust will not get airborne.)

The instructions are somewhat basic, and can be confusing when it comes to the running gear. Most of the assembly should go without a hitch, but the running gear is complex, and would need several drawings explaining exactly how it is supposed to come together. (The confusion comes mostly from the fact that the four powered wheels were powered by a shaft system that transferred the power from the middle of the suspension where it was attached to the hull. There is an excellent article of the history of the tank -unfortunately in Hungarian (http://www.hadmernok.hu/182_05_nemeth.pdf)-, but the drawings should help positioning the drive shafts.

The casting is very high quality, and flash is minimal; there is no complaint there. The hull, however, was warped a bit (see below). The fine, subtle details are really nice. The kit comes with some PE, which is also quite delicate and well detailed.

Assembly

Hull

I started the building with assembling the hull first, and this is where I ran into the biggest issue with the kit: the lower hull (which is provided as a “tub”) is somewhat warped – it was not symmetrical. (See photo.) Perhaps it would have been a better choice to provide it as several flat pieces, as most models go about it. I used the engine deck to force the back of the hull into the right shape -with generous application of superglue and patience I managed to make the lower hull conform to the rectangular shape of the engine deck. It is not perfect, but at least now it is almost symmetrical. The top of the hull has four parts: the smaller, rectangular engine deck piece, the large part covering most of the top, the sloping frontal plate with the driver’s hatch, and a small, rectangular part covering the nose.

Starting from the back I simply glued one piece after another, making sure they are fitted to the lower hull perfectly, hence slowly ironing out the asymmetry. This obviously does put some stress on the resin, so be careful. Since the hull is relatively thin, very small amount of force is required to hold the pieces together until the glue set; nevertheless make sure you do not break the tub if you run into the same problem and use the same method of correcting it. (Other option would be to warm the tub up with hot water or a hairdryer, and shape it while it’s hot, but I went about the safer way.) I hasten to add that it might have been only my sample, and other models are perfectly fine. Since this is the only sample I have I can’t extrapolate from this.

Apart from the issue of asymmetry, the lower hull and the sloping frontal part had some gaps as well; the fit was not perfect. I decided to use Green Stuff to fill the gaps, filling and reinforcing the attachment points in one go. Another fit issue was that the two top panels did not meet completely head-on: there was a slight step between the two, instead of a smooth transition. Since the large panel had hatch details moulded on I could not sand it to profile; I simply used putty and liquid green stuff to build up a slope on the back panel instead. Again; not something I prefer doing, but this was the best I could come up with.

I find it important to mention that these issues are not unheard of with resin kits; this is the price you pay for unique and rare models.

I glued in the armored protection for the vision port on the front, and the round bases for the return rollers. The armored hatch on the front houses the hull machine gun, too, and can be displayed folded-up. The problem is that only the barrels of the machine guns are provided, and there are no interior details. If someone is able, scratch building would solve this issue. As for me I glued it shut.

The great thing about the hull and turret is that the places were the vision slits, and other larger pieces would go are actually marked with a slightly different texture. This is seemingly a small thing, but it makes placing these parts so much simpler. I really did appreciate this effort on behalf of the designers of the model.

While the green stuff was curing in the seams of the hull, I finished the turret.

Turret

The next step was the assembly of the turret top. The commander’s hatch, unfortunately, does not fit in perfectly; it’s slightly larger than the hole it covers. You may leave it open (but the turret lacks internal details), or you can start carefully shaving off the extra, while continuously fitting it into its place to make sure you do not overdo the surgery. As I said, this is your standard protocol with resin models; they do make you work. (There is a sitting Hungarian tanker figure from Bodi, which might be used to cover up the empty space should you decide to leave the hatch open.)

The guns are supposed to be installed into the turret using a system that would make them movable. The main gun is held by two rectangular pieces with a plastic rod between them. The gun sight has a similar system, while the twin machine gun is installed using an even flimsier system of a half-sphere representing the ball-mount, and an L shaped part holding the half-sphere against the opening of the turret. The L shaped part can only hold the half-sphere in place if it is actually pushing it against the opening, which is not something you can actually achieve with simply gluing it in place. (The machine gun in the hull is not movable.)

The problem is that neither of these systems really work well. First, it’s quite difficult holding several parts in place while gluing; and you do have to hold everything in place in order to position the guns correctly. Second, the holding parts are a bit undersized. If you care about movable guns, you can just replace them using larger plastic squares; as far as I was concerned, I just glued the guns into place. The third issue is that before you do any of this, you really should check if there is clearance enough for the guns on the bottom of the turret. I managed to glue everything in place the first time around only to find out that the main gun was in the way of the bottom of the turret, so I had to adjust it again.

The assembly of the machine guns is a bit tricky. You have a central PE T-shaped part which supposed to provide the “backbone” for the twinned guns; the barrels are supposed to be running on both sides parallel, and the short hand of the T is supposed to be folded up to act as a holder. The problem is the distance of the gun barrels from each other… you can’t really set it correctly. Unless you glue them into place first, making sure they are parallel, and then add the PE part, you run the real risk of making them a bit wobbly. I used a thick, gel-like CA glue which gave me plenty of time to adjust things before setting, and did just that. This saved me from measuring and trying to position the barrels parallel to a precise distance from each other. The downside is that from now on extremely fragile things are hanging over the turret and the tank’s body making handling a bit more difficult. The detail on the barrels of the machineguns is somewhat soft.

I installed the main gun at this stage. The barrel is nice and straight. The muzzle break is a separate piece, and you have to be very careful gluing it into place, since it should be placed to the longitudinal axis of the barrel. It will show if it is off center even a tiny bit.

I finished the turret by adding the two armored vision slits on the sides.

Back to the hull…

The seams went through a series of sanding/filling until I was happy that no seam was left. I checked them after I applied the primer as well, and corrected the little imperfections.

Suspension

The model overall is very simple- except for one part. The suspension and the running gear are quite complex, and take up most of the model. The wheels and larger parts are on huge pouring blocks, which need to be sawed off carefully.

The suspension is workable, so you can put the tank into any sort of terrain. It also means you will have to carefully position the large and small road wheels before gluing to make sure they line up correctly should you want to display the model on a flat terrain.

The main bogie of the suspension unit is made out of three flat pieces; gluing them together was not very simple, and you also are advised to check if the top parts are right in the middle; otherwise the overhang will interfere with the smaller arms holding the large road wheels.

As mentioned the instructions are not very clear on how to install the drive system into the suspension, but the drawings in the linked article should help you. On of the problem is that while the suspension is movable, the drive train is not- so you will have to glue everything in place, making sure that the wheels will touch the ground once the whole unit is installed on the hull. I did the best I could, but honestly I am not sure this is the way to do it. In any case most will be invisible, so you might as well skip it. With all the complexity, it is a very impressive (although quite unnecessary) design feature of the model.

To mount the suspension units in place, I drilled a hole where the units meet the hull, and inserted a thick wire in it. A corresponding hole was drilled in the central unit, and glued in place using two-part epoxy. I reinforced the attachment point with wire because did not want to risk the joint giving up over time. To make sure everything is fixed in place until the glue set, I also used CA glue.

 

Once the suspension was in place, I started adding the tracks. As the tracks are not workable, you will have to glue the suspension in place. If you wish to display the model on a flat surface this can be done at the earlier step; if you wish to display it in a diorama setting, now is the time to decide how the suspension should be positioned. (The tank’s suspension can be set into pretty funky positions, so it might be worth considering a diorama.)

The tracks come already detached, which is nice. However… Every tracklink had to be trimmed of 4 connecting stubs that used to attach them to the pouring blocks. This was time consuming. (Even though I mostly build tanks I have a confession to make: I hate building tracks.) The tracklinks, in theory, may be workable as they click together -but you do need to force them, risking breakage. Since the traction is not strong enough for them to hold, some glue will have to be applied once you built a section. It is impressive nevertheless; but I did find that longer sections tend to fall apart from their own weight without glue.

The problem with individual tracks made of resin is that you don’t have as much working time after you applied the glue as you have with plastic tracks. I built up several smaller straight sections, and tried to get the overall shape from these. Once I was happy with their position, I applied the extra thin CA glue, and hoped they would hold. At the return rollers, where the tracks were bent at a steeper angle it was difficult to make them conform to the shape of the roller without coming apart. The problem with the moving suspension was that it was difficult to hold everything stable, so I ended up gluing the suspension arms in place before adding the tracks.
One last advice: plan the installation of the tracks so that they meet on the bottom of the drive wheels, and not in the air before or after the return rollers. Don’t ask me how I came at this conclusion. Once I am done with the painting I will glue the tank onto a base, and it will flatten out the tracks; right now the suspension is pulling them up a bit.

 

The mudguards and the rest of the missing pieces were only added once I finished the tracks, and the tank was firmly sitting on them. The mudguards should be fit over an angular part of the hull, but the folding line on the PE will not conform to the hull-shape exactly… I ended up gluing tiny evergreen rods where the mudguards were supposed to go, and used them as support. Where the mudguard did not meet the hull (in the angular part, where two hull plates meet) I simply unfolded a little of the flap that I had to fold into the photoetch previously.

With this the tank was finished. It will take me a while to get it painted, but the painting stage should not be very difficult. If you have some leftover decals from other Hungarian tanks, you can built a what-if vehicle, which was accepted into service, but since it only reached prototype phase it carried no marks in real life. It can also be built very clean or very dirty, since it did go through trials; in other words the opportunities for weathering are endless.

 

1/35 Meng Renault FT-17 part 3.

2blchok

Please find part one and two here.

Well, the tank is finally done. It took me a long time to build, it was one of those builds which just did not want to get done; even though the model itself is just amazing.

Last steps: mud and dust… again. I have to admit I did the different stages of muddying the tank parallel to the T-55AM; everything written in part 6 applies here, too.

Quote:

The next step was to apply dust. Dust and mud are the two things I’m not really good with, so this part I put off as long as I could. I settled for AK’s dust products, and mixed my own mud.

AK’s dust comes as a suspension; when you apply it, it goes on thick, and the results are not very pleasing. At least this is what I thought at first. As with everything I realized the secret is not adding stuff to the model, but removing it after. I diluted some of the mixture in white spirit, dabbed it onto the tank, waited some time, and then using a wet brush I removed most of the dust, spreading it around, adjusting it. The key is to be patient: you can always repeat the procedure (in fact, you should), if there’s not enough added. Adding less is always  preferable to adding more.

One the dust was dry, I went on mudding up the lower chassis.

What I failed to realize for a long time is that it’s not enough to buy a product called “mud”, and them smear it onto the tank; just as you can’t just cover a tank with a paint labelled “rust”, and expect realistic results. Obviously the results will be sub-optimal; there are really no shortcuts in mud. (I feel this sentence carries some deeper, more profound meaning.) Even if you buy custom-made products you still have to learn how to apply them, and that’s that. And since you need to learn it anyhow, you might as well save some money and make your own mud.

The first layer was simple pigments suspended with water. I dabbed it on, then after it was mostly dry, removed some using a brush. A day later the procedure was repeated with a different color. The key here is layers; just like Shrek, mud has layers, too. Old mud tends to be dryer and lighter; newer deposits tend to be thicker, darker and placed lower. I dabbed the pigment-water mixture all over the lower chassis, the side-skirts, even on the top of the mudguards (in a much more diluted form).

I also splattered some using a loaded brush and a toothpick onto the side-skirts; any splatters that were out of place (on the side of the turret, for example) was removed with a wet brush using downward motions, leaving a very faint streak behind. I’ve also used Vallejo’s mud product on the side-skirts; it produces quite dark splatters which are quite different from how it looks like on the photo on the bottle.

A day or two later I decided to try something I’ve never done: I made thick mud. I used Mig’s Neutral Wash as a base. I got this as part of a set, and frankly I can’t really find any use for it; it’s too grey to be a “normal” wash. If you know how to use it, please let me know.

It did serve as a good medium, though. I mixed in a lot of brown pigments of different shades, some sand and some static grass, and then offering my soul to the gods of model building, I proceeded to apply the mixture to the lower chassis.

The method was the same application/removal as before; with a brush dampened with white spirit I adjusted the amount of mud on the wheels and chassis. I also added some on the mudguards (and sprinkled some on). The results are actually quite spectacular; I did not dare to hope for such a nice effect.

Once the mud dried (I gave it a week), I used my graphite pencil to give some metallic shine to the edges. The exhaust was treated with different rust colored pigments and brown washes.

The last stage was to take care of the remaining small details. I painted and installed the tools; the PE straps were a pain to add. The painting was relatively easy: the metallic parts were treated with the Vallejo primer and then rubbed some steel pigments to make it look like metal. The edges were dry-brushed with AK’s true metal steel paint. The handles were painted with buff, and then using a stiff brush I gently painted some brown oil paints; this made the surface uneven and gave an impression of wood grains. If you take a look at the instructions you’ll see that the hammer should have been installed under a plastic part during the construction. I left it off deliberately to make painting it easier. Installation was simple: I cut the handle in half…

I painted the straps of the tool box, and the construction was essentially finished.

 

 

 

 

 

 

 

 

 

 

 

1/35 Meng Renault FT-17 part 2.

Please find part one here.

So yes, the engine was finished mostly in black with all the piping, etc. done in glorious copper and bronze. AK’s steel pigments were used to give a metallic shine to the transmission and the metal body of the engine.

 

Looking at the interior it must have been singularly unpleasant to actually fight in this tank. Yes, it was a revolutionary design, but it still had a couple of leather slings for the commander to sit on, he had almost zero visibility, and the driver probably better had his feet removed because there was not much space for him to fit them.

 

I chose one of the kit’s paint scheme; unfortunately this is where the instructions fall flat a bit- only a side-drawing is provided. The box art gives a slightly different perspective but I still don’t know what the right side is supposed to look like.

Regardless the model was first painted with Vallejo’s German Grey primer, followed dark green in several layers. Each consecutive layer was lightened a bit with the yellow (actually Dunkelgelb by Mig Ammo). I focused the lighter colors on the top and the middle of the panels; even the full-green pain scheme looked pretty good in my opinion.

Once the green cured, I masked it with silly putty, and proceeded with the yellow, then the brown. The brown was Tamiya’s NATO brown with some yellow added.

Once the main steps were done I had to retouch some parts with a brush; these masking jobs never turn out perfectly.

 

The contrast at this stage was pretty stark between the colors; light brown and yellow filters helped to blend them a bit. Once everything dried I applied varnish on top, added the decals and sealed them with another layer of varnish.

 

I applied dark brown wash to the rivets and other small details, and used a wet brush to remove the excess after 30 or so minutes; this created some nice, pleasing streaks. I also used some streaking products by AK to add further streaks.

 

 

1/35 Meng Renault FT-17 part 1.

I’m finishing up long outstanding builds… so I have several of these builds running parallel. I’m finishing up the T-55 (and quite a few others) alongside of this build.

bv8ppon

This is probably the most iconic tank -ever. (Or it should be.) Meng has come out with a really excellent model of it a couple of years ago, and this February I just gave in and purchased one at my local hobby shop.

I was not disappointed. The manual is excellent (and gives a pretty good history of the model), the instructions are clear, the quality is top-notch. AND it comes with an interior. I have to say I fell in love with Meng.

 

 

The assembly is quite straightforward, with a couple of issues, though. (What model is without them, right?)

The suspension actually works; you get little metal springs with the model, which is nice; putting it together, however is a bit fiddly.

 

 

The engine is very well detailed; most of it will be hidden, though if you choose to install it. For this reason I decided I’ll display it in front of the model, as I did with a couple of other kits before (T-34, T-44…)

 

The interior got the usual heavy treatment. I used a black primer (acrylic spray… since then I switched to Vallejo’s German Grey primer), which was followed by an enamel-based varnish, and Tamiya’s flat white. If you use high pressure, it can be sprayed with very little dilution, which will result in a solid cover (always an issue with white and yellow).

I used the windex chipping method to create worn surfaces, with the black showing through. The contrast is quite high; in retrospect I should have used some brown instead.

Once the model was try I used oil paints to create discoloration and streaks on the side-panels. The interior details are quite nice; the painting of the ammunition in the ammo rack is a pain in the neck, though. (There’s a choice of main guns; the machine gun option would leave you without this chore.)

The bottom of the engine compartment was treated with different AK and Vallejo products (engine grime, oil, fuel stains).

I took some artistic licence painting the engine; I tried how it would look like if I installed it, but eventually decided that it will be displayed outside of the tank.

Once the interior was finished I assembled the hull; the tank was ready for painting.

 

 

 

 

 

Armory 1/72 Luchs

3ifn8mf

This is the fourth Luchs in this series… and the third plastic one.

Let’s see…

Modelltrans Luchs
Flyhawk Luchs
Maco Luchs

Introduction -Armory’s plastic kits

The instructions are clear and easy to follow; the one gripe I had with them is that the parts are not numbered on the sprues: you get a sprue layout on the cover of the instructions, and you have to find the parts on the sprues based on it. It’s not that difficult to do, but it still is a hindrance during the build.

 

The model came in an “envelope-type” box, which opens on the top (and bottom). I personally don’t like these boxes because they aren’t very resistant but it’s a personal preference. The sprues were sealed in plastic bags alongside with the PE fret, decals and instructions. The cover image shows the tank in the middle of an engagement. The back of the box shows a set of computer generated images of the model, and the different build options.

The model is a 3-in-1 type of kit: you can build three different versions of the Luchs: early, mid, and the up-armored late versions.

Inspecting the plastic parts I found a lot of flash, and the detail was somewhat soft, and in some places missing. (Most notably one of the armored protectors for the vision slots is smooth, although it was ribbed in real life.)

The PE parts are thin enough and detailed; I liked working with them. The tank is really brought to life by the PE additions; the plastic itself only gives it a basic shape, really, and the PE gives it detail.

The decals are well printed and thin; there were no issues during application.

 

The build was relatively quick. The lower hull does not come as a single “tub”: you have to glue it together from four parts (bottom, sides, back). The top of the hull comes as one large part. Unfortunately it goes onto the sides rather than fitting into the opening on the top, which means there will be a seam-line around the superstructure that needs to be filling.

Before installing the tracks I’ve first finished most of the hull with all the PE details, added the roadwheels, and painted the hull and the mudguards in the base color (primer red) following the base color (RAL 7028 Dunkelgelb 1944). I added the tracks at this stage, attached the mudguards, and added the remaining details to the hull. These I painted with a brush.

I carefully painted the pattern using Tamiya olive green lightened with deck tan (for scale effect) with a brush. I was not particularly concerned about how even the patches were, since they would not be prominent after the whitewash; only small parts of the underlying camouflage would be visible. I did use a light brown filter to tone down the contrast a bit. The decals were added this point, since the whitewash was applied on the field, onto a vehicle already in service.

Once the basic painting was done, I sealed the paint with Testors Dullcote to protect it from the subsequent steps, and covered the whole model with AK Interactive Heavy Chipping Medium. This was followed by Tamiya flat white, and after about ten minutes of waiting I went on creating chips with a wet brush and a toothpick. The paint was nicked carefully at places using the toothpick, and I used the wet brush to enlarge these chips.

Once I achieved a decent amount of chipping and cleaned off the model with some running water, the contrast between the white and the underlying colors was really stark.

Sealed everything with Dullcote again, and picked up MIG Ammo’s washable white. I covered the model with it using an airbrush, and after it had some time to dry I created a transparent, uneven white layer over the whole tank using a wet brush. Moving the brush with a downward motion I blended everything together nicely; the paint left a translucent white layer on top of the model.

The weathering part is always a bit difficult, especially in 1/72; it’s really easy to overdo in this scale. One thing I’ve noticed is that the camera and the eye sees differently. It’s probably the trickiest part of the whole process to make sure the model looks good on screen as well as with the naked eye. As a general rule if by eye the model looks good, on photo the effects will appear somewhat overdone.

I used some heavily diluted winter streaking grime from AK Interactive as stains on the lower chassis. Different brown pigments mixed with white spirit and “splashed mud” from Vallejo was used to simulate the mud thrown up by the tracks onto the lower chassis and the road wheels. A silver pencil helped to create a worn, shiny metal look on the edges of the tracks, and gave a metallic sheen to the gun. (Normally I use it on all edges, but in this case the whitewash made it unnecessary.) I’ve used a guitar string -E string- for the whip and the crow’s feet antennae.

Well, pretty much this was it. The model was not very difficult to build (some experience with PE required), and the detail looks good when finished. The crow’s feet antenna looks especially good compared to most of the other offerings in this scale.

Interestingly all 1/72 Luchs kits have minor differences from each other: the location of the Jerry cans, the combination of changes, the shape of the mudguards, even the turret are all slightly differ from each other. Unfortunately I cannot really comment on the accuracy of these; there are not many photos available, and they might -or might not- be representative to all the tanks produced.

Hunor Models Toldi I-II. (1/72)

 

x08

History

The Treaty of Versailles forbade Hungary to possess or to develop armored vehicles after the First World War. Only in the ‘30s did the rearmament start in earnest, later than in most European countries. Some unsuccessful experiments led to the realization that a completely independent domestic tank research and development program would be prohibitively expensive. After some evaluation the government bought the license of the Swedish Landswerk AB L-60 in 1939, and started to manufacture a modified version under the name of 38.M Toldi I, or Toldi A20. (Miklos Toldi was a legendary nobleman and warrior in the 14th century.) The main modification was in the armament: the main gun was changed to the Hungarian-produced 2cm Solothurn anti-tank rifle, and an 8mm Gebauer machine gun. The first order was for 80 vehicles, produced by both the MAVAG and GANZ companies. In 1940 the Toldi received new, stronger torsion springs, and was renamed to Toldi II. 110 such vehicles were ordered. The first combat experience in Yugoslavia during the ’41 campaign highlighted how inadequate the main armament was, so 80 of the Toldi II variants were rebuilt with a 4cm gun, and had their frontal and turret armor increased to 35 mm. Even with these improvements the tank was hopelessly outclassed on the Eastern front by the T-34 and the KV-1, but due to its speed and good radio equipment it was put to good use as a reconnaissance vehicle.

 

Contents

x04

x05
The PE fret is a bit too thick, but workable. Annealing with heat helps a lot.

 

Since the two models (Toldi I & II) are very similar, it made sense to review the two kits in one.

What you get is a sturdy box with the parts packaged in three plastic bags, cushioned with some packing peanuts, and a very basic instruction sheet. The artwork is really nice, though a bit inaccurate in the case of Toldi II: the frontal armor depicted is identical to the Toldi I. It was, in fact, slightly different, which is correctly reproduced in the actual kit.

The instructions are a weak point of the kit: some basic steps are shown, but the locations of many parts have to be figured out using external references. The instructions are the same for both kit (they are for the Toldi I version), but since the difference is really not that big, it’s not a problem as far as the two versions go.

Both kits come with about 45 resin parts and a small PE fret. Although you get a toolbox for both versions, it should only be used with the Toldi II variant (at least according to the sources I have). There are minor differences in the frontal hull detail (most examples of Toldi II had increased frontal armor), but these are molded on, so you don’t have to worry about them. The different gun is of course, quite self-explanatory. I found a curious feature on the Toldi I turret: even though it uses a circular antenna, it also has the mount for the whip-type antenna. First I thought it was left on by mistake since the two kits use almost the same turret; but then I took a second look at the scale drawings in Magyar Steel, and I found the mount there as well. There’s a small PE fret included, which is quite thick and hard to handle. The detail on the road wheels is a bit soft. The tracks are supplied as one, preformed piece, and have nice, crisp detail, with a fair amount of flash. The kit supplies two kinds of PE lampguards: sheet metal and a wire frame. The wire frame was mostly used on the Toldi I, while the sheet metal was on the Toldi II, but as a third option one can just leave them off completely. Most of the archive photos show the tanks without them anyway, or without lamps, for that matter. (Probably a result of the missing lampguards…)

One of the prominent features of these early tanks was the rivets. The rivets on these kits are quite nice, though a bit oversized (in this scale they should give a good definition once pained).

I ordered the Bison Decals set for Hungarian tanks, which has a very comprehensive range of markings for all sort of vehicles that were in service in the Hungarian Armed Forces.

 

 

The build

x03

I built both kits parallel, because the relatively few parts make for a quick build. Only the turret has a huge plug that needs to be removed; the rest of the resin parts were designed to be easily cleaned up. The fit is generally good, although the locator pins on the sides of the hull do not align with the holes of the side panels, which carry the suspension. It’s best simply to cut them off, and align the parts by eye. The lower hull and the road wheels go on without a problem. (There’s a fair amount of cleaning involved with the wheels.) The tracks were a bit difficult for me to handle, but with a bit of foresight most of the problems can be avoided easily. Great care needs to be taken when removing them from the casting blocks, as they are quite delicate, and snap easily. The real pain came when I tried to install them with the idlers already glued into place. In retrospect it’s better to glue only the inside half of road wheels onto place, add the track, and then add the idler, the return rollers, and only then the outside half of the road wheels. I could have avoided a whole lot of suffering had I realized this in time… this is when foresight comes into play.

I glued the grille for the engine in place (a bit of a hassle, but was easier after I trimmed the locators on the PE parts). The big aerial for the Toldi I version was installed with the help of some green stuff. A word of warning: since the 2cm gun for the Toldi I is extremely delicate and fragile, only install it as the last step. I didn’t, so I had to use a replacement barrel. (A 2cm flak barrel from a ModellTrans kit –not exactly the same, but close enough in this scale.) After this the turret was put into place, the small bits attached (equipment and whatnot), and the tanks were ready for painting. The Toldi I was finished in the early-war three tone camo, while the Toldi II received an overall green paintjob -by that time people realized they’d need to blend in, so the flamboyant colors went out of fashion.

Some light brown filters helped to tone down the colors a bit (although it’s still quite high to my taste in the Toldi I.)

Pigments were applied dry, and fixed with some matte varnish to simulate dust/mud. As usual I used a pencil on the edges to give some metallic shine to the vehicles, and I was done.

x02x01