Tag Archives: diorama

Paint review – MRP: Cream, AK Interactive: Cremeweiss

Well, I have not used either of these brands of paint before, so I was curious how they work.

MRP

After some serious shaking, the results were less than stellar, as you can see.

However, I was unperturbed and undeterred, since the reviews were generally good, and people tend to like this brand a lot. Not to mention my experience with AK’s primer taught me something important: if you think you have shaken it up, shake it some more…

So that is what I did. I bought a nail polish shaker, and used that for a minute to mix up the paint.

The results were great. The paint sprayed very nice straight from the bottle. (I painted up the leftover hatches and whatnot from the Takom Panther and the bottom of a leftover hull for the purpose of this post.)

To quickly do a side-by-side color comparison, I sprayed AK’s cremeweiss and the MRP cream next to each other onto a panzer IV hull . The AK paint is really nice, and as this paint is not pre-thinned for airbrush, so some water was necessary. (I have been using this paint as a base color for the Panther interiors, so I did have some experience using it.)

As you can see the AK paint has a more yellowish hue, while the MRP paint is more off-white. I am not sure which one should be used for German interiors. As you can see from the photos of the Tiger 131 restoration, the color is a somewhat yellowish/brownish white, but not as white as the MRP one, and not as yellow as the AK one. (And then there is the million-dollar question about the accuracy of the paint colors the restaurators used…)

I suspect, considering the scale effect, the real color is somewhere between the two; the AK paint is way too yellow in 1/35 scale. It is probably spot on if you put it next to the real vehicle, but with the scale effect considered, it is too dark and too yellow – some lightening with white is required for sure. (Which is something people usually do anyhow, since most paints need to be adjusted for the scale effect.)

Regardless, both paints are great. They spray great, they cover well, which is a big thing when you are discussing whites, and I found no problems using them. Overall I will be happy to buy from either of these paint ranges in the future. I am quite set on Tamiya right now, as experiments with other brands left me sticking with what worked before. Now I am a bit more open for trying more brands.

AK Interactive’s Still Water- review

 

So. AK Interactive’s Still Water.

This thing.

The AK Interactive webpage has the following to say about it (bold mine):

Still Water is a liquid crystalline product specially designed to reproduce the effect of clear still water on dioramas and vignettes. Still Water is self-leveling and capable of flowing over uneven surfaces; apply thin layers, no more than 3 mm at a time. If depth is desired, build up thin layers. When applied on non-porous surfaces, such as glass, this product can be lifted and cut to desired shape. High quality acrylic product.
This product can be tinted with acrylics offering many possibilities. No toxic

Let’s see. I did not try to eat it, so I can’t comment on toxicity. It does stay crystal clear after hardening, which is great, and according to the description. Let’s see how the other properties function.

Coming out of the bottle it is relatively thick, yet it flows very easily out of the tip; be careful not to flood the surface.

NOTE: my aim was not to recreate a large body of water, such as a stream, river or lake in a diorama setting. That will be the topic of a separate post. I wanted to depict stagnant pools of water, either collected on abandoned vehicles, or puddles on the ground. I took a look at this product through this lens, which obviously colors my perceptions of it, however, the points about its properties are valid in any settings.

 

I took out two dioramas: the STALKER one with the T-62, and the Zrinyi II. I wanted to add water to both, which was the main reason buying this product. The non-toxicity and water solubility was the selling point.

I added small puddles under road wheels, in crevices on the ground, on the surface of the T-62 wreck. The product came out thick -it kept the convex, bulging form of a liquid with very high surface tension; it did not spread easily, even when encouraged with a brush. This made it extremely difficult to apply in thin coats, as the instructions suggested; the product does not spread easy. I thought the self-levelling part comes when it cures.

After hardening, I found that it did not self-level in the was I was expecting it to. The surface was not level in most cases -only where the product was applied in a thick layer.

The importance of surface

The nature of the groundwork was also extremely important: for the Zrinyi I used actual soil/mud hardened with plaster. This surface was torn up by the product, as it shiveled (dried) out, the edges curling upwards, tearing the water product away from the surface.

Not ideal.

The T-62 diorama was done using only Tamiya textured material for ground mixed with pigments; it served as a much better basis for the water effect. The product could not peel off the surface while it was curing. Apparently you need a strong bond between the particles of the groundwork for the product to stick to, otherwise as it cures, it will shrink on its surface, and this will peel off the whole thing.

Lesson one learned.

Self-levelling

How about being self-levelling? (Also a big must.)

Well, not exactly self levelling. When fresh, the product behaves as a liquid with a high surface tension. It does not spread out, as a liquid resin would, but it forms smaller or bigger blobs, droplets, like a somewhat thick soup would. You can help spreading it with a brush, but it has its limits, since it does not “wet” the surface it touches easily (due to the high surface tension).

This is how it looks when fresh and after curing.

 

As the product cures it flattens out, but it also has the tendency to wrinkle, and to follow all the irregularities underneath – so at the end you get an uneven surface. It simply cures onto the surface underneath in an even thickness. Applying multiple layers will not solve this problem: you simply increase the thickness of the product, you do not even the surface out. I wanted to put puddles onto the mud guards and the splash guard (the spillway being blocked by detritus), but as you can see regardless of applying the product in several thin(ish) layers, it refused to form a nice, even surface over the model. The leaves and other surface irregularities show through even after four layers. It looks a bit like water in the process of being frozen…

Weirdly I found bubbles that were present within the cured product, even though there were none when I applied them -or at least none visible. The high surface tension means that if you manage to trap air inside, or worse yet, manage to foam it up, it will not be able to escape. So be warned.

Dilution

OK, so it does not spread well, even when helped with a brush. What happens if you use some water and a brush? (Genius idea, eh?) So apply a generous amount of product on the groundwork, and add some water (about 1/10th of volume). It did make the product easier to spread. It did not foam so easily. But come next day, and…

…this is what happens: it becomes milky. The surface kind of looks like if it was mud saturated with water (which is nice), but the effect is not perfect, and the milky discoloration is very much not welcome. This also underlines the issue of tinting. The manual says you can tint this product with acrylics, but there is a limit of how much you can add.

Mixing with inks/paints/pigments

Since it is water soluble, it is a quite simple matter of mixing inks or water-based paints into the product. I used chestnut ink by citadell, since it was brown -although not exactly mud-brown, as we can see. It is for experimenting, anyhow; I wanted to see what it does when mixed with color -and perhaps salvage the foggy water effect on the Zrinyi diorama. I also applied a few drops onto the base of a space marine figure to see how it looks as a puddle. Without any staining the water effects did not show up very well; it merely looked like if the ground was shinier in patches.

With staining, it still formed an uneven, shiny surface after curing. (The first photo shows how it looks like fresh when applied.) I added three drops of ink – in retrospect it was too much. It might have given a more realistic result had I added only half a drop, instead of creating a chestnut colored slurry.

On the Zrinyi it may not have levelled the surface out, but on the bright side, it did look like fresh -and somewhat weird colored – mud. Success – I guess?

So what happens when I add pigments instead?

Well, it kind of looks as churned-up mud. The chestnut colored mud underneath even gives a slight color modification wherever the new mixture was thinner, giving it an actually quite pleasing looking mud effect. Overall, it looks like water-saturated, churned up mud that would suck you in if you stepped into it. I would call it success, although it was not the effect I was going for. (I wanted big puddles of brown water.)

Special effects

Let’s see if we can make radioactive sludge, lava or something similar out of this thing…

To make radioactive industrial waste, we just add a little bright, light green paint. Applied to the base of a few miniatures, the effect is actually quite nice, both applied thick (into the crevice of the base of the daemonhost), or thin – to the ground next to the boots of our Thousand Sons terminator. As an added effect I also put some more on top stained with a tiny bit of yellow ink. I have to say it is a pretty good effect.

The lava is a different matter. I added red ink to the product, and it formed a somewhat blood-looking pool at the foot of our Rubric Marine… so blood it is.

What happens if you prepare two different colors, and carefully blend them into each other? I can’t show the results, because I placed -rather carelessly- the instructions of the Armory Walker Bulldog I was building into the mix, but placing drops of the two colors next to each other to allow them to mix, resulted in, well, the two liquids mixing together completetly. I was hoping to create nice swirls and whatnot, but the liquid flows easily enough for it to mix completely.

 

Possible ways to use it

Well, small puddles on miniature bases were kind of successful. Without coloring it looks just shiny, somewhat inconspicuous. (It is difficult to see what the intended effect is if the product is not colored.) With some ink mixed in, even with a somewhat unrealistic color, it looks better -not as a puddle of water, but as a puddle of some sort of thick liquid. The issues with self-levelling are not as apparent in small scale.

If the base was suitable it produced a somewhat convincing effect, although it is visibly not level…  You need a flat surface to create large puddles to begin with. (The track-marks on the Zrinyi actually have somewhat convincing puddles.) Creating larger bodies of water were so far not successful, and neither was creating a smooth surface over an uneven base. One thing to note: once the product cures, you should stain the surrounding groundwork with a darker brownish color to represent the wet ground around the water.

You may be more successful applying the product to wet surfaces -although the groundwork, as we have seen- must be very well bonded, so you cannot apply it while the groundwork is still hardening. (It would make it simpler if you could just add the puddles at the same time as you build up the terrain.) As it is, if you pre-wet the surface, it might be possible to spread it more evenly.

Probably in dioramas, where you prepare a hard and even surface specifically for the water, it would work well (in a relatively thin layer) as the surface of a lake – we will see when I get around making a crashed Schwimmwagen diorama I have been planning a while now. For those ad hoc puddles I was trying to create it is less than perfect.

In short: it does not work the same way as the non-water soluble resins do: these resins do not lose their volume during the curing process, and they do tend to float easily, with very little surface tension, which makes them very effective in creating level, smooth surfaces. This product does shrink while curing, and it forms an evenly distributed layer over the surface it is applied to- meaning that any irregularities below will show up on the surface. In other words this product has a learning curve – a lot of experimentation is needed. The upside is the non-toxicity. (The resins, on the other hand, give off heat while curing, so they can actually melt the plastic if you apply it too thick, plus they are toxic as hell.)

Mixing in pigments, and applying it to an uneven surface will result in a very convincing, extremely wet-looking surface – just make sure you use multiple layers and multiple colors. For fresh mud, it is excellent. For bodies of water -not so much. 

Overall, it will not be the go-to solution for all your water needs, even though the non-toxicitiy and the ease of use makes it sound very attractive. It is absolutely true further experimentations will be required to master this product. I am planning to use it in a crashed schwimmwagen diorama to see how I can use it to form larger surfaces of water; I’ll post the results.

I think as with some other weathering products, the water solubility is its biggest weakness – the surface tension simply does not allow it to spread as easy. I found the liquid resin products (which are not water soluable) give  much better coverage, and they are actually self-levelling –  and as mentioned also highly toxic, and give out noxious fumes. Difficult choices -or perhaps not. Personally I would choose the non-toxic version even if I have to work harder to get a comparable result.

How to make leaves for dioramas

Well, after a three week hiatus (even scale model builders get married sometimes), here’s a quick post on weathering.

There are several options and many products for making leaves. They can be used anywhere: on dioramas, and even on individual vehicles. They are great and subtle way to increase the level of realism: a brown, crumpled leaf on the floor of a vehicle, or stuck between tool boxes make a model look more real.

There are punch-sets (pretty good ones), PE and amazing laser cut, and other aftermarket sets, but there’s a free, and pretty convincing alternative, too, courtesy of the common birch.

From wikipedia:

The flowers are monoecious, opening with or before the leaves and borne once fully grown these leaves are usually 3–6 millimetres (0.12–0.24 in) long on three-flowered clusters in the axils of the scales of drooping or erect catkins or aments. Staminate aments are pendulous, clustered or solitary in the axils of the last leaves of the branch of the year or near the ends of the short lateral branchlets of the year. They form in early autumn and remain rigid during the winter. The scales of the staminate aments when mature are broadly ovate, rounded, yellow or orange color below the middle, dark chestnut brown at apex. Each scale bears two bractlets and three sterile flowers, each flower consisting of a sessile, membranaceous, usually two-lobed, calyx. Each calyx bears four short filaments with one-celled anthers or strictly, two filaments divided into two branches, each bearing a half-anther. Anther cells open longitudinally. The pistillate aments are erect or pendulous, solitary; terminal on the two-leaved lateral spur-like branchlets of the year. The pistillate scales are oblong-ovate, three-lobed, pale yellow green often tinged with red, becoming brown at maturity. These scales bear two or three fertile flowers, each flower consisting of a naked ovary. The ovary is compressed, two-celled, and crowned with two slender styles; the ovule is solitary. Each scale bear a single small, winged nut that is oval, with two persistent stigmas at the apex.

 

There was a reason I hated plant taxonomy at university. Anyhow, it boils down to the following: some parts of the seed pods (not a scientifically correct name) look like maple leaves.

Birdch seed

Mix some white glue with water, and use it to attach these to the surface of the model (or diorama); the seeds themselves can be mixed with this glue, and used as amorphous plant deposits in crevices.

The effect is pretty convincing, and if you live in a country where the tree grows, it’s free. I’ve been using this on the T-62, the Zrinyi II, the D7 dozer I’ve made, and in general, most 1/35 models I’ve been building lately. The one downside is obvious- it looks like my models live in a very uniform forest populated by a single tree; so I’ll be buying some punch sets in the future, that’s for sure.

 

Tamiya 1/35 T-62 with Verlinden damage set p4.

The first part of this build can be found here, the second here, and the third here.

4mn2vf7

Well, the small dio is finally done. It’s been a long, long build. It took me more than a year back in the US to find the conversion set; I was lucky to grab it cheap from someone who gave up on it. It then sat in a box for the next couple of years, then brought back to Europe, and finally ended up in the UK. The actual build time was a couple of months; quite quick, really, but I did take a lot of shortcuts. These were mostly done out of necessity (of preserving my sanity); the set is not exactly user-friendly. The fit is poor at places, the instructions are horrid, and some parts are just plain impossible to do (like the installation of the turret ring). I’m not even mentioning the warped parts, like the gun barrel. (Wait, I just did…) So to save time, my already thinning hair, and money, I just rolled with what I had (with the exception of the gun barrel).

Anyhow, when all is said and done, it built up into a very inaccurate, but quite nice tank.

I tried to show a gradient of colors from back to front: burned out engine compartment dominated by rust colors, to the greenish hues of the frontal hull.

ce0c9pe

The figure also took a LOT of time to hunt down; unfortunately it is long out of production, so my best bet was to get lucky and buy one from someone. (This is a really good reminder of buying things when they are available. However, it also is a sure way of building up a stash that would shame a hobby store, so there is a delicate balance to be achieved here.)

And one final word about the photography, before the pictures. I’m using a Nikon D3300 with either the kit lens (when the subject is relatively large), or a Tamron 90mm macro lens. The models are placed in a collapsible light box, and lit up using two LED lamps from the side. The whole contraption is in the kitchen, with fluorescent overall lightning, which explains the difficulties to actually getting the colors right on the photos- the camera, no matter how smart it is, is having trouble with the white balance. I did take some photos during the day using the same setup, and the sunlight as an overall source of illumination; the difference is visible. I will set the white balance manually next time. The other issue I dislike is that the figure looks a bit glossy; when you look at it in real life, it is much more matte.
It’s a learning curve of taking photos, and it’s also a matter of convenience. Living in London means I have absolutely no space dedicated for model building, so everything needs to be set up in the kitchen when I build/take photos. Not very convenient.

So without further ado, here’s the finished STALKER diorama:

Tamiya 1/35 T-62 with Verlinden damage set p3.

4zikfl6

The first part of this build can be found here.

Second part here.

With the major building and painting finished, it was time to put the tank into context. Well, into a scene, that is.

I buy large plastic cases to keep my models in; they are excellent for display, protection against dust and curious fingers, and also make it easy to transport the models. In some cases I use them as small dioramas.

In the second part the tank was reasonably finished, but it was still somewhat uniform, despite of the layers upon layers of paints, paintchips, oil paints, filters and pigments. Now was time to bring out the sponge…

The technique is reasonably simple: dab the sponge (or the scrotch brite) into the paint, dab most of it off on a piece of paper, and then keep dabbing it against the surface you wish to cover with paint/paintchips. (Depending on the amount you cover you can depict paint chips or flaking off paint.)

I’ve used the external fuel tanks to experiment; unfortunately the box was not long enough for these to be mounted onto the tank…

First, I’ve used the sponge technique to make the uniform brown surface into a rusting, multicolored one.

Second step: using light green I repeated the process. (This color is excellent for paint chips, too.) It’s not a problem if it’s too light at this stage; in fact, it’s actually necessary- the subsequent washes, filters will darken the color anyway.

And finally, the result: I’ve used overall brown washes, which created a grimy, used look. Some more green was dabbed onto the barrels in a much smaller area, and voila – we have an interesting, rusting surface with different shades and colors.

The tank was glued onto the base using two part epoxy (it’s quite heavy because of all the resin and metal), and then I used Tamiya’s soil Diorama Texture Paint. (I’ve got it discounted when the largest hobby store chain in the UK went bust a couple of years ago.) The color is not exactly great, but we’ll help it a bit later using the airbrush.

Using the sponge method I’ve added green patches onto the turret and the front part of the tank- I wanted to achieve a color difference between the front and the back.

The paint was toned down with some brown filters.

I’ve used the leftover tracklinks from the MiniArt T-54-1 for the tracks; a lot of them don’t have teeth, since they are the special links for the ice-cleats, and they are also narrower than should be, but to be honest I did not want to spend money on extra tracks. Nobody will notice, unless they read the text.

I’ve bought some AK Interactive products online cheap (six bottles for twenty quids) – rust, different colored streaking products, washes, and one that simulates algae streaking… so I used this tank to try them all.

I’ve used more rust pigments on the turret and the side of the hull, and used a dark brown filter to tone down the contrast a bit. Black pigment was used sparingly to depict soot (my fiancee’s insistence)  The way I use these pigments is to load a brush with Tamiya’s flat varnish, dab it into the pigments, dab most of it onto a piece of paper, and then dab it onto the surface of the model. You want to have some in the brush, but not too much; kind of like a heavy drybrush.

 

I’ve used some wine by Eduard to depict a creeper growing out of the driver’s compartment. The fallen leaves were made using the actual seed pod of a tree. Unfortunately I can’t figure out what it’s called; it looks like a fat caterpillar, and when you grind it up between your fingers, it falls apart into Marple-leaves like parts, and seeds. I mixed some white glue and water, added this plant material, and distributed onto the tank.

 

 

 

Last part is coming next week with the vegetation and the STALKER dude added

Tamiya 1/35 T-62 with Verlinden damage set p2.

The first part of this build can be found here.

The tank needed to be burned out and rusty- something that stood abandoned (and looted) for years. I took a lot of liberties with the amount of rust and weathering -this degree of decomposition would only happen after decades. It’s an interesting point in our hobby: we tend to overemphasise the damage, the chipping, the rusting on most of the AFVs we build, which makes them interesting to look at, but quite unrealistic and out-of-scale. The point is: it’s not meant to be an exact replica of the real thing, it’s only a representation of an idea.

The idea here is a tank that had a catastrophic fire in the engine compartment, so it was abandoned in the Exclusion Zone around Chernobyl. (I wanted to use the STALKER figure, so it had to be Chernobyl. I could not come up with a realistic scenario why a T-62 would catch fire there, though, so you’ll have to use your imagination.)

Anyhow: after spraying on a base-coat of different rust colors, I proceeded to coat the tank with AK Interactive heavy chipping medium, and some NATO green from Tamiya. Once it was dry to the touch I created areas where the paint was worn off to differing degrees: more on the back and on the thinner metallic parts, and less on the front, where the fire did not heat the hull up that much.

Once the chips were done I sealed everything with varnish.

I put the tank onto the base of the display case I intended to use and realized that it was too long for the external fuel tanks to be mounted… I could have turned the turret around if I had not used epoxy glue to stick it onto the hull… Oh well, more battle damage.

I’ve used ochre and dark brown filters on the whole of the vehicle, and some burned umber washes to deepen the shadows in the crevices.

I’ve glued the tank onto the base using epoxy glue, and mixed some sand with plaster to create a rudimentary terrain; this will -hopefully- be refined further. (As soon as I get some replacement tracks for the tank, of course.)

While we’re waiting for the groundwork to be finished, I went on to further enhance the rusty feel for the tank: I used three different colors of iron oxide (it comes in brown, red and yellow, and dabbed it on using a brush and some flat varnish.

e94tbk4

I’ve also tried Lifecolor’s rust wash set to see how it works; I suspect an airbrush would be a better way of handling it. (It is not easy to use. Well, it’s easy to use, what’s not easy is to get results like you see on the cover. Unfortunately there’s no real guide provided.)
They suggest glossy surface, however it tends to form droplets which is not ideal. (Surface tension is not always useful.)

I’ve checked out the storage box on a museum Shilka, and it was pretty much pure rust… so this is how the tool boxes will look once I’m done with it.

wi9isnw

Some more rust over the burned areas will also be necessary, and also soot. It’s a good question how much soot actually remains after years of being subjected to the elements, but this will not deter me from adding some. In fact I’ve long been wanting to add white soot left over from the burning rubber rims of the roadwheels. I’m fairly certain this would be washed away by the rain in a short order in real life, but I shall not pay attention to this issue.

Anyhow, this is how it is as of now. Keep tuned in; updates will be coming (soonish).

Zrinyi II part 2.

a3zgz5j

So, my first ever 1/35 diorama; I used it as a trial for the T-62 dio I’m planning. (The first statement is not entirely true; I did do a snowed-in Mobelwagen long time back, but a small snowy vista is hardly a complex diorama.) It started without a concept; I had two figures and a bunch of equipment to use, so I made use of them… The scene -in retrospect- depicts a Zrinyi II in a prepared position somewhere on the Eastern Front in late Fall/early Spring (probably in 1943, as they are not fleeing). Two German soldiers are discussing the tactics, while one of the tankers is sitting on the tank, uninvolved, having a smoke. Not very dramatic, but there you go. I finally got to use the German figures which -as you might have guessed by now- were sitting in my collection since 2007 gathering dust. The Hungarian tanker came from Bodi.

Disclaimer: I had no idea what I was doing when I started. (I’m not sure I do now.)

One thing is for sure: I’ve learned a lot about how to “populate” a diorama.

The first steps were adding the textured base from Tamiya. It’s supposed to be mud colored, but it’s not very convincing; the color and texture looks something entirely else. Something better would be needed.

I went out to the garden, gathered up some dried-out soil, and mixed it with plaster; using this mixture I added some terrain irregularities. (The German figures came with a small base which needed to be blended in the rest of the scene.) I used a couple of boxes and fuel barrels as well to make the scene look busier. Because the plaster made the color of the earth I used, I went over the whole scene with my airbrush several times using different earth tones. The tank was in place by then, but the little overspray actually helps in this case; it blends in the mud on the lower chassis with the soil. I made some more mixture of soil (and much less plaster), which was “flicked” onto the lower part of the screens on the side. I loaded up a stiff brush, and created the splatters using a toothpick (it is not difficult, but first try which direction you need to move the toothpick to make sure the mud ends up on the tank…) As with everything: the layers are the key. Several slightly different colors were added in several light layers – it adds  to the realism of the weathering.

The other issue with the soil was that it cracked as it dried. It was a fortunate thing for me- it does look like real McCoy. In this case I can claim that it was totally intentional. Absolutely. However if I want to produce a groundwork that is not cracked, I might be in trouble. Experimentation is in order I feel; this is where shortcuts, like pre-made mixtures can help.

I have bought a bunch of different diorama products to prepare the vegetation. The self-adhesive grass patches looked much better once I used the airbrush to spray some brown color on them. The laser-cut shrub has an unfortunate, unnatural color; green and brown oil colors helped to make them resemble actual living plants.

The figures were painted over several years, really; I’m not much of a figure painter. For the face (the most problematic area) I used Citadel’s different flesh colors in layers. I had to get a replacement head for the sitting figure, as the original was lost.

As a last step I put some fallen leaves and other plant detritus into the scene. There’s a tree which has a long, caterpillar-like seed-pod. (Despite of being a biologist I have absolutely no clue what the tree is called… As soon as I figure out I’ll amend this post.) When you  crumb it up, it falls apart, and some parts do look like fallen leaves. I mixed these in with some strongly diluted white spirit, and placed it all over the base. Small details like that actually made this scene a lot more realistic.

On thin ice (DML 1/144 15 cm s.I.G 33/2 (Sf) auf Jagdpanzer 38(t) Hetzer)

crl0gwm

 

 

I’ve seen a brilliant little diorama somewhere about a sinking tank; this was my first attempt of creating something similar. (Mind you, I was not ready to immerse myself- or the tank- into cold water yet. I just wanted to show a tank riding over cracking ice. The water is quite shallow apparently, as the tank is not sinking into it. Let’s call this a “study in ice”, shall we?)

Anyhow. All I needed was a small model (the 1/144 DML was perfect for this), and a small base. The display case is made for displaying golf balls; I’m not really sure why you would want to do that, but I’m not playing golf, so who am I to judge? It was the perfect size for the tank, though.

The creation of base was easy. I got a diorama-making set that allowed me to model water. I simply had to underpaint the surface with the desired color (deep blue), and layer the transparent resin over it. I used some blue tac to make sure it does stay in place.

On top of it came a sheet of plastic cut up into small parts -modelling the breaking ice. That was it.

mjbvv5n

h203cgd

Placement of the modelWhile it was setting I lightly pushed the tank into it, so that it would not sit completely flat on the surface.pb3yyjtnfhdjj3

 

The tank was given a quick white-wash using the hairspray technique, and glued into place… and there you go: a quick and dirty diorama of a brave tank driver.

qyzjjdfv4w29lxsc9ebpitiat9iiqm73vyn7sc2tlt

A simple Warhammer 40K dio brought to you by Ferrero Rocher -part 2

This is my second foray into the world of Chaos Space Marines. This little diorama was created to provide a safe base for the Dark Vengeance Astrates I have got from Ebay, using a Rocher Ferrero box as a display case. I did not really have a concept in mind aside from depicting the characters as advancing on an unseen foe. (This was due to the small size of the box; had there been more space available, I could have put in a dreadnought or an Ultramarine Terminator as an enemy to advance upon. (I did buy a couple of models off Ebay over the last couple of years, but only now have I started to actually finish them properly. A lot of the models I got needed extensive surgery or their paintjob stripped, as I got them cheap and used, which hindered the work. Mostly due to my laziness, but still. Buy new if you can help it.) The other big push to actually start taking painting WH40K seriously was the fact that my landlord was giving up the hobby, and he sold me his paintset for ten quid. And we’re not talking about the starter set… we’re talking about a HUGE box of paints, washes and inks. I started to watch videos about blending, how to paint fabric, and all the other tricks of the trade – so I found these little figures a welcome variety from the dull-colored tanks (and they look awesome in general).
Anyhow, here is the second box of Chaos.

The figures themselves are brilliant: their poses are very dynamic, and the details are just amazing. The only issue I had with them was the seam lines which were sometimes on very visible- and hard to reach places. Most of them were filled in, but I’ve left one or two untouched because I was worried about the potential damage to the surrounding detail. Since then I got a bottle of no-sand putty from True Earth; this should help next time.

I tried to give these guys some justice (since they got none from the Emperor…), but this is how far I got. The Emperor’s Children warlock (I think… that third eye must be a sure sign of psychic powers) got completely dark eyes – ever since I’ve read about Daemonhosts in the Eisenhorn trilogy I liked this idea of the absolutely black eyes without the whites around the iris. I guess it’s not far-fetched to imagine a sorcerer who is possessed by a daemon, so this works out fine. The only thing I forgot to do before taking photos was to apply some matt varnish to the cape; it is too shiny to be a convincing fabric.

The most loving care was given to the Death Guard with his axe. His armor is probably not going to be shiny and clean; but I did not want to go for the full-on “puss filled boils and rust” look, either. I made him unclean looking using some oil washes, and the “fuel stain” product from AK, and used different browns, reds and organges to make his axe rusty-looking.

The Dark Angel was the less inspired of the three, as I don’t know much about these guys yet. The whole paintwork started by priming him black, and then trying my hands on the Citadel line of inks – it worked well to produce a deep dark-green color. The orange gem on this chest does need some work yet, I admit.

I used some pigments on the boots and fabric to depict dirt -after all, they are on a muddy battlefield-, and called it a day. The diorama base was prepared the same way as the previous one -using cork as pieces of rock/concrete buildings (at this stage it’s uncertain), and weapons and armor pieces from the spares box to add some variety. I ended up using actual earth mixed with white glue as a base with different shades of pigments sprinkled on top.

A simple Warhammer 40K dio brought to you by Ferrero Rocher -part 1

The Warhammer universe is a very fascinating one indeed. From a (somewhat over the top) space-opera-based table-top game it became a very interesting universe with an incredibly fascinating lore. This is a world, where the Imperium of Man is even worse than the Nazi regime, yet they are the good guys, simply because the others are even worse than them… (Worth reading just to get a sense what the dark AD 40 000 means for Humanity.)

True, most of the books read like fan fiction, but there are true gems in the Black Library. Aaron Dembski-Bowden and Abnet two of the best writers ever worked with Games Workshop, and created some truly remarkable books about Chaos, and what corruption is for people (normal or space marine) who fall into corruption -from their own choice (Eisenhorn), or because someone else made this choice for them (Thousand Sons). Since reading The Legion and the First Heretic from the Horus Heresy series, the Night Lords series, and the Talon of Horus, I became immensely fascinated by Astrates who turned to Chaos. Most other writers simply depict them as quite undimensional characters -as in “hur-hur, we worship Chaos and froth in the mouth”. Dembinsky made a pretty good case that these traitors actually have a point, and they are more than just a bunch of brainless maniacs… So I got myself a couple of WH40K figures (both Forgeworld and GW ones) on Ebay and got on painting.

The question is though- how you display them? The answer, of course, is the eight-sided plastic boxes Ferrero Rocher comes in… (Eight, as we know, is a special number signifying Chaos Undivided.)

Well, for this project everything was new- so I made everything up as I went along…

Base: turn the box upside down; the top will serve as a base. Glue pieces of cork onto it, as it can be used as an excellent way to depict rubble, stones, broken concrete.

Added some Tamiya texture paint (concrete color and earth color). Did some oil washes on the cork slabs.

I glued some pieces of weapons and different debris from my spares box (also from Ebay) on to the base, but it did not look very convincing. From then on, I just said screw that, and used actual dirt mixed with white glue… Once it settled, I sprinkled all sort of earth and dust colored pigments on top, and called the earthwork done. Most everything (weapons, vehicle parts, etc) are covered completely, but hey, it’s a battlefield, right?

The painting of the figures took about six months of work on and off. I kept watching tutorials on youtube (especially about how to paint fabric), and kept doing and redoing the paintwork. Also experimented a lot using inks and washes. I have to say I did learn a lot about figure painting, but I’m still not doing the GW school of painting very well. (Jewels are still not working out well…)

I chose three of the seven Dark Vengeance chaos Astrates, and glued them onto the base. Job done.

I tried to choose figures that complement each other- a sorcerer, a World Eater berserker, and an Emperor’s Children space marine. The paintwork is trying to convey the differences between these characters: the sorcerer is well-kept, the World Eater is wearing a very, very worn, damaged and mutated power armor, and the Emperor’s Children has also seen better days when it comes to paintjob and general armor maintenance. I really like the menacing pose the World Eater stroke: the power claws held slightly apart convey an incredible level of threat. The half-helmet is nice, too; it exposes the pallid flesh on his skull. (At least I chose to see it this way. My minis, my rules.)

Three other chaos chaps got onto another similar base for part 2.

The only thing left now is to clean off the sides of the base- but that’ll have to wait some time. I think we’ve had our fun together with these guys, and it’s time to move on.