Tag Archives: bulldozer

Miniart D7 Armored Dozer -review 4. Final touches

So we have left off at the stage where the MiniArt dozer was almost ready. Some parts were still unpainted, but we are at the last leg of our journey.


After receiving another olive drab coat, it was time for preparing it for rust.

The engine has received several washes with dark brown and black again; and the underside of the chassis, alongside with the suspension and the dozer blade got painted with different rust colors randomly after the olive drab base. (From dark –almost black- brown to bright orange.)





The model was covered with hairspray, and then a second (somewhat lighter) olive drab was applied to it. (Before the final paint coat I’ve attached the suspension units to the chassis.) With a damp brush I could selectively remove the upper paint to expose some rust; I tried not to go overboard, except on the dozer blade itself. The effects were quite convincing. Due to the olive drab base, the contrast is not as big as I would prefer, but the overall effect is actually very nice.


As I said: build the tracks one tracklink at a time



The finished paintjob… it looks too good to weather

Chipping commencing… the rust colors are pretty neat, and the contrast is low enough not to look unrealistic.


Some areas received more heavy chipping than others.


The dozer blade was seriously worked on; most of the covering paint was rubbed away




I think the results are quite convincing




The oil tank and the lower part of the chassis was worked on heavily, too. (The walls of the oil tank being thinner and more exposed would mean they rust easier.)


Some careful chipping on the armored radiator cover t as well

Chipping done -dirtying up.

First, the model received a protective semi-matte varnish to protect our previous work.



Then came the decals. As I mentioned in part 1, the decals are brilliant. They don’t have transparent borders, even the stars. The carrying film is tailored to the paint, so you won’t see silvering between the arms of the stars. This does complicate the application a bit, since the decal can tear easily. (Because the large star decals are not just one discs, the individual parts move very easily in relation to each other -and this means stress on the film.)


After the decals were dry, another layer of varnish was applied to protect them.



I applied pin washes of dark browns and black. After it was dry, I used Mig’s washable dust in a diluted form as pin wash as well -to model the dust collecting in crevices and around rivets. The excess was removed with a damp cotton swab. (These special products are fine, but honestly, you can achieve the same effect with pigments suspended in water.) I also lightly airbrushed this mixture on the flat surfaces on the top of the vehicle: the bonnet and the top of the cab. (For airbrush application these washable products are actually great; the pigment is so fine in them, it won’t block your airbrush.) I’ve used a wet cotton swab to remove some of this dust. It made it look more uneven, more realistic. I’ve repeated it several times to build up some layers.


The sides were streaked using oil paint and turpentine; further dusting/fading was done using light colored pigments. The oil stains were added using AK’s Oil Stain product; same with the fuel stains. (I got lazy, I admit. Recently I purchased a lot of weathering products out of curiosity; most of the time they are time-savers, but not offer significantly better quality than the good ole’ modeller’s tricks.)


The top is dirty; I don’t think it’s regularly cleaned as not many people can see it.


Different rust colored pigments helped with the exhaust pipe


Some dust has accumulated around all rivets


The worn look on the dozer blade was achieved using some metallic pigments (both gun metal and silver). This created a very convincing sheen.




Although it seems to be a returning theme to complain about the seemingly unnecessary complexity of sub-assemblies, these are not really complaints. I have enjoyed the building of this model immensely, as it did prove to be a tremendous challenge. It felt like an accomplishment when it finally took shape at the very end of the build. It is definitely not for the beginner; it is difficult to build even for a more experienced modeller with somewhat limited skills like myself. It was a great experience to work on a model whose designers obviously pulled no punches when it came to accuracy and detail; you have the feeling that the people who produced it were working on it with passion. It was also the enjoyment of the challenge; rarely have a model challenged my skills this much. Having built it, I have to say it feels just like when you just have finished a Marathon. Was the pain worth it? Absolutely.

And the best advice for this model? Pace yourself. Do not rush it, and you will enjoy the build. It is very intimidating when you are at step 1, and realize you have seventy nine other steps (one of them requiring you to build two sets of tracks…) waiting for you. If you take one step at a time, you will have an incredible little model on your table. This is not a weekend project; you will burn yourself out if you treat it as such; as it is, it took me two month to finish it working almost exclusively on this model.

MiniArt seems to have decided to establish itself as a producer of very high quality and complex kits; I think they are going into the right direction.