It isn’t. It really is about electronics and the giant squid that will hold the whole thing in place.
Sorry to disappoint.
Anyhow. I finished the interior in the first part, and after a long period of trepidation I did bring out my soldering iron (I bought it two months ago), and using lead free solder, I managed to bang together a few LEDs, a switch and a 9V battery.
I had a bunch of LEDs waiting; I bought a home-made lighting kit for the model, which provided some rudimentary instructions and some good pointers about how to install LEDs into a plastic model, and I also bought a bunch of cheap LEDs on Aliexpress with the resistors already installed.
The top part of the ship had to be cut off to give better access to the bridge (I marked the area with a green marker). The extra PE set provides a bridge, so I wanted to show it off as best as I could. (Not much can be seen through the ports, but at least it’s there. It is smaller the space available in the model, so the installation was not perfect, but again: not much will be seen of it, anyhow. And it will glow green.)
The whole exercise was less painful than I expected; it is not pretty, but it works. (See photos.)
I essentially put all the LEDs going into the body of the model into a parallel circuit, and just put the green LED that goes into the base of the squid in line next to the switch. I do hope all the wires will fit into the hull… I drilled the appropriate holes, and fixed the base of the wires with a glue gun onto the bottom plate of the hull. I ended up only using the LED from the lighting kit for the headlight; the rest were too bright for my taste. (The others are too dim, and quite large, too, but this is a compromise I am willing to accept.)
I used the masks on the observation windows, and found them somewhat lacking… some of them are a tad too big, and some of them are inaccurate in shape. It is the most obvious in the case of the central circular section: as you can see it should be made up by triangular shapes. The problem is that the masks provided are equilateral triangles, and as you can see their sides should be longer than the bases to create something that resembles a framed observsation port, rather than a cut-up pizza with the slices slightly pulled out. I ended up removing these masks, and using masking fluid slightly diluted with water. (The masks on the sides of the central part were somewhat oversized, so I ended up removing them as well.)
Well, at least we got some masks, so there’s that. Some of it was actually quite useful, too.
I also started working on the squid. The arms were relatively easy to determine how to assemble (the slots are tailored for individual tentacles, but it did take some time to work out which one goes where), and I drilled a hole in the base for the green LED.
Well, while the Panthers are being built, and the baby is growing, I do, of course, have plenty of time for a new kit. Obviuosly.
I am not sure what really made me buy it; once I happened to stumble upon a photo of the model I just had to have it. The interior (of which I do have a fetish for), the steam-punk look, the LEDs (which need to be added as an aftermarket), and the giant squid are all very attractive on this model. Not to mention my dearest found it very cool, too, and since she is very understanding about my hobbies, if she likes a model, I will build it. So I hunted it down on Ebay (it was relatively cheap and came with the ParaGraphix PE set), and started to build it. I mean, just look at this thing.
The model would look good out of the box, but the PE definitely makes it shine. (Not to mention the LEDs which actually make the model shine.) The PE provides chairs, tables, railings, ceiling tiles, ceiling beams, and an entire extra interior compartment (wheelhouse); all in all, they are a tremendous addition to an already great model.
The LEDs came from an aftermarket set for this model created by a fellow modeller, who sells them on Ebay.
The main saloon is just, well, cool. The sofas, the book shelves, the organ and the globe add a very Victorian feel to this craft. The PE set provides the captain’s bridge/wheelhouse as well, which is originally not included in the model; for this you will have to cut a few holes into the plastic parts. (Last photo, shaded green.) It remains to be seen how it will be installed; right now I’m not sure.
I used Citadell paints to do the details (books, wooden desk, etc.), and AK Interactive’s True Metal paints to do the walls, ceiling and floor. I thought a submarine most likely has bare metal walls, and I opted for brass. I did some subtle weathering using oils -washes and streaks- but did not want to go overboard; after all, this is Captain Nemo’s sub, and it is well maintained, not a wreck. I applied the paint with drybrushing – this way I left the underlying Vallejo primer show. (I am worried that if the surface is overly shiny, it would look unrealistic. I am especially worried about how I will deal with the exterior. I know, Verne made the Nautilus a steel boat, but I prefer the brass/copper/bronze look. I might just mist the paints over the primer. (The scale effect will make the metal look less shiny – after all, it is as if you were looking at it from a distance.)
I guess I will cross that river when I get to it.
Now it is time to learn soldering… (Translation: the project halted indefinitely.)
This is an interesting part of the armor model world: the 1/144 kits by DLM. They are small little gems; it’s a shame that they disappeared from the market. If you have a chance, grab as many as you can. The presentation, the level of detail, the ease of assembly are all just top-notch; these kits provide a nice break from the 1000+ part 1/35 monsters I sometimes get involved with. For this scale you still get moulded-on detail that rivals some 1/72 kits, and also PE, and slide moulded gun barrels with holes in the muzzle breaks. Thankfully you don’t get individual tracklinks.
I’ve seen a brilliant little diorama somewhere about a sinking tank; this was my first attempt of creating something similar. (Mind you, I was not ready to immerse myself- or the tank- into cold water yet. I just wanted to show a tank riding over cracking ice. The water is quite shallow apparently, as the tank is not sinking into it. Let’s call this a “study in ice”, shall we?)
Anyhow. All I needed was a small model (the 1/144 DML was perfect for this), and a small base. The display case is made for displaying golf balls; I’m not really sure why you would want to do that, but I’m not playing golf, so who am I to judge? It was the perfect size for the tank, though.
The creation of base was easy. I got a diorama-making set that allowed me to model water. I simply had to underpaint the surface with the desired color (deep blue), and layer the transparent resin over it. I used some blue tac to make sure it does stay in place.
On top of it came a sheet of plastic cut up into small parts -modelling the breaking ice. That was it.
Placement of the modelWhile it was setting I lightly pushed the tank into it, so that it would not sit completely flat on the surface.
The tank was given a quick white-wash using the hairspray technique, and glued into place… and there you go: a quick and dirty diorama of a brave tank driver.
One can only wonder what went through the minds of the people who designed, and more importantly, approved this project. I’m probably not far off to say that only someone, who plunged a whole planet into a global war for “living space”, could actually look at the plans, and say, yeah, I think it’s feasible.
While it’s very attractive to compare the endless oceans with the endless Steppes, the problem is that while a battleship worked on a sea, while it would not really be feasible on land. The Land Cruiser with its tremendous top speed and maintenance requirements would be a serious impediment to any force that would like to take Russia in a lightning strike. (It would probably never get to Moscow if you took the continental drift into the opposite direction into account.)
It really is not worth talking about the history of the P1000 too much; enough to say that someone actually came up with it in ’41, Hitler approved, and the whole planning process went ahead until ’43. It was not just someone doodling on the back of a napkin. They actually were serious about it.
The project was mercifully axed by Speer in ’43, although I suspect it earned him the nickname Albert “the PartyPooper” Speer in the Wolf’s Lair. To be honest, Speer probably did prolong the war by organizing Germany’s war production on the basis of rational thinking, which was lacking from the rest of the gang. This vehicle is the epitome of all that was wrong (if you take away genocide, and murderous wars, of course) with the Nazi leadership: all grand vision, no practicality. If they had built this lumbering beast, they would have had less steel to build air planes, assault guns and tanks; surely it would have been better for everyone involved. They would even have left a gigantic, cool looking playground for us. Even if it was built, and even if it worked as intended, it would have been highly unlikely that it would have ever fired a shot in anger, unless the front arrived to the factory before it was bombed by the Allied air forces. If we consider the technical issues even the Tiger I was struggling with (constant breakdowns, high maintenance requirements, low operational and tactical mobility), you can imagine what sort of challenges would have this monster meant for its operators. Say, you needed to fix a broken track. Or change one of the road wheels -from the inside row. Or simply get it moving –or change direction- without breaking anything in the automotive mechanism -or the surroundings. Not to mention I can’t imagine the amount of recoil the naval guns would have, but looking at how they had shaken the battleships they were mounted on, I’d think they would have seriously overstressed the suspension. And finally: this vehicle offers a hilariously oversized target for anything that can shoot; it’s pretty difficult to miss, in fact. While Hitler did like big guns (which makes you think if he was overcompensating for something), the fact remains: if you want to kill people, there are more practical ways; like a strategic bomber force, with which the Germans never really bothered with. (For which Great Britain is eternally grateful for them.)
Tankcom has made a risky move to issue a 1/144 model of this paper-panzer, but at least they made it clear on the cover that it’s not an actual, “serious” project. On the cover art we can see several Maus superheavy tanks, the P1000 in its full glory, and a couple of Nazi UFOs in the background shooting lasers (and a V2 rocket for added dramatic effect).
The kit itself is really simple; the whole assembly takes about two hours. There’s a huge opportunity for scratchbuilders: the interior of the turret and the engines simply beg to be built into the model. Since I’m not good at these conversions, I just glued everything together. Interestingly the kit comes with some areal recognition marks, as if any German bomber pilot would have difficulties telling apart a German 1000ton tank from an Allied 1000ton tank. (It would probably have space for a helipad, too.)
Contents of the box
It’s so big, my lightbox is not large enough… I guess I got used to the 1/72 scale tanks, and not the 1/144 scale ships.
Putting it all together
The biggest issue during the build was the question of camouflage. I was pondering what sort of paintjob would this 4 storey vehicle get, and thought of the old-school battleship dazzle camos.
These patters were designed to break up a ship’s contours, and to make it harder for gunners to range the ship. This, of course, would not work very well on land, as it would be quite easy for a gunner to find an appropriate feature in the landscape to which he could set his sights. It remained a possibility, though.
The other option was to paint a scenic painting of some hills and forest, or a Bavarian village on the side.
In the end I chose bluish colors and bluish filters because the colors of objects tend to look greyish-bluish in the large distances, and lots of horisontal shapes so that it could “blend into” the terrain irreguralities. Since this vehicle is about the size of a four storey house, any sort of camoflage only has a chance to work from a significantly great distance (about 30-40 miles). The naval guns mounted on the vehicle make this distance a feasible engagement range, too. I’m not sure this is the perfect way to paint such a large vehicle (after all, I ignored the hazards Allied air power poses), but I’m happy with the results.
Begin the painting process… black primer (applied from a spray can), and some masking tape. The bloody tape refused to stick; I’ll have to get a stronger one.
Second layer of paint, second layer of masking tape.
After the third layer, the masks are removed… and tears are shed. It took some time to clean up the paintwork; the masking tape did not stick down, so paint did get underneath.
The roadwheels got all three colors applied to them.
After correcting the paintwork, I went on experimenting with filters. I used mainly bluish and yellowish filters pre-diluted; did not work with the oil-dot method. (Perhaps later I’ll give it a go.) I tried True Earth’s ageing/fading products as well with a small degree of success. So far I’ve figured out why they did not work previously: the surface has to be extremely matte.
Once I got sick of the filter work, I added some dust to the lower portions (although looking at the size of the vehicle, I’m not sure it should get dusty too much), ran a soft lead pencil around the edges to give it some metallic looks, and added a touch of rust. The monster is done.
This one is a very old build. I bought it at least ten years ago; it seemed like a saner option than buying the 1/35 version made by Dragon. (Not to mention a cheaper one.) The subject is one of those atavistic, yet mind-blowing things of the Second World War: a gigantic gun that is mounted onto a railway carriage. Tactical and operational mobility is almost zero; and good luck if you want to turn the gun 20 degrees. It’s useful if you want to lob shell after shell on a faraway target, if your target is large enough, and stationary enough. (They had to build the railroad tracks usually before the deployment of the gun, and it does take time. The rate of fire was also somewhat low; a couple of shells every day. Additionally, you have to factor in the wear and tear on the gun; the lining had to be changed quite frequently, which also lowered the strategic value of these weapons.) But to be fair if you want to cause damage and kill, you just use bombers. It’s cheaper and more flexible. (If you really must cause damage and kill, of course. For one, I prefer these things in 1/144 scale.) The non-plus ultra of this insanity was the Dora railway gun; a the largest gun ever built, with an average rate of fire of two shells per day. I do have it somewhere in 1/144, waiting to be built. It’s a huge model even in this scale, by the way. The 1/35 scale model of this thing is over two meters long by the way…
Back to the 1/144 Panzer Korps. As I said before, these kits are amazing; small gems in fact. I should have bought all I could when they were still in production, and were readily available. This is the gun in all its glory. The detail is astonishingly sharp and very, very good; some 1/72 models could hang their heads in shame looking at this level of detail. And you get photoetched parts, of course. And a metal barrel. Everything nicely pre-packaged, waiting for you to start. The build was amazing. (As a personal note: I still remember watching the Wedding crashers with my girlfriend while I was building it. It’s strange how things like this associate themselves with the model…) The build was a joy. The only challenging part was to glue together the railway sections, and fill in the seams so that they don’t stand out. (The surface is really rough, so I had to try to make the surface of the filler look similarly rough. In other words: it was not a difficult build.) The PE really does enhance this little gun. There is a crew provided, but I decided very early on not to include the little dudes. I usually don’t add figures to my models, because no matter how well they are done (and I cannot paint them well enough) they look artificial, and ruin the illusion of the model for me. We are getting into philosophy here, but let me explain it quickly. I think we all accept that a scale model is a representative 3D image of the real thing, and only that. It does not try to bethe tank in a smaller scale. This is why we accept heavier weathering on models than on the real tanks; we accept that it is not a direct, smaller copy, but only the representation of the real vehicle. Kind of like a technical drawing, or a painting, and as such it overemphasizes certain things. By adding a lot of scratches, dust and dirt we show that this tank had a story, it was used. Adding a crew changes the model; it makes it a bit toy-like for me. (We’re not discussing dioramas, of course. Dioramas tell a story, which is a different matter altogether.) So, back to the model at hand. In the background you can see a 1/72 DML T-34/76, and a 1/72 DML Mi-28 Havoc… The first layer of paint was black, of course, and then successive layers of lighter and lighter German gray. Because the scale is so small, the final color should be really light. The Leopold only looks dark on these photos because of the gloss coat applied. A flat coat makes it look much lighter. It also seals the decals. Filters applied using oil paints. Mostly white, burnt umber and blue, applied using the dot method. I did not want to overdo the weathering (after all, you would not be seeing any scratches and rust from a distance that corresponds this scale), but a little fading, some discoloration due to rain does make the model feel more “real”. A little size comparison: 1/35 Stug IV, 1/144 Leopold, Thor, JgdPanther and some Hetzer-based howitzer whose name I forgot. (Apologies for that.)
I really like the 1/144 DML armor offerings; the true regret I have is that I did not buy up the lot when they were available. Fortunately I managed to scavenge one or two from Ebay for a much higher price than they used to go for… (Lesson learned: even if you have 100 kits, you MUST buy that one you like, in case it goes out of production.) These models are tiny little gems: the detail is sharp, and very nice, the build is easy, and they just simply look good. The technology of injection molding has progressed incredibly: even the delicate gun tubes are completely in-scale, and they are also hollowed at the end. (I guess asking for rifling would have been a bit too much.) All in all I have not seen anything like these tanks in plastic. This post concerns the Jagdpanzer IV I’ve built from the 1/144 range. The build was easy, and the camo was applied using an airbrush. (Talk about overkill; I thought it would be interesting to see how it works with a model that is the size of a quarter. ) I did not weather it a lot -after all, in this scale it would be mostly invisible. I did use a pencil to apply some metallic shine to the edges of the vehicle. Since this really is a tiny gem of a model, I thought I’d build my first ever diorama. It was back in Miami, where I bought a nice little display case made for hockey plucks from a gigantic store that only sold boxes and display cases. (God I miss that store…) The first step was to cover the sides with masking tape to protect them. Next I chose a couple of coral rocks I found around the house (they were literally lying around the grass), and using Miliput I formed a base for the groundwork, and embedded the rocks inside. I did not think about the transition between the Miliput and the plastic -that was some oversight I should have corrected. I tried the model to see if the composition was good, and used its tracks to make trackmarks. Next I sprayed the whole thing with different shades of brown; I was careful that the white coral rocks only got a little bit of overspray, so there’s only a hint of the colors on them. This blended them nicely into the surroundings. From a company that sold diorama stuff for model railways I got some foliage. In this scale the differently colored little flakes were perfect as grass and flowers. Put some white glue where you want the foliage to stick, sprinkle them on, then carefully shake the diorama upside down to remove the extra -and you are done. So there you have it: our tiny tank destroyer proceeding in a scenic path towards its destiny. (Let’s pretend for a minute that these things were not used to kill people, and we’ll feel much better. I know I do.)