Category Archives: Maco

The ultimate 1/72 Luchs showdown: thoughts on the Armory, ModellTrans, Maco and Flyhawk kits

lekjbve

So now I have finished building all four offerings: Armory, Flyhawk, Maco and Modelltrans; it’s time to take a stock of what I’ve learned. I would not really go into accuracy, as I could not find any books on the Luchs; all kits differ slightly from each other with respect to location of the exhaust, tools, tool boxes, Jerry cans, and so on. As I could not find the time and resources to get to the bottom of these differences I merely comment on the models themselves.

ztx6kk2

The Modelltrans kit is an old resin model of the Luchs; it’s a bit undersized, has very few parts, good detail, and has some issues with bubbles in the resin- in other words, your average garage company resin model. It’s fast to build, but it’s quite expensive for what it is; plastic models will always be better priced. It builds into a respectable depiction of the Luchs, but it’s kind of “rough on the edges”, and does not come with the aerials.

waj598x

Hands down, the Flyhawk kit is the most detailed and the most complex model of the four; it’s essentially a miniature 1/35 model. This, of course, comes with a price: it’s also the most difficult to assemble. The crow’s feet antenna is not very convincing; the PE offered by Armory is a much better representation. (But this is the only one that comes with width indicator rods.)

3ifn8mf

Armory’s plastic Luchs is a new kid on the block; the company only recently started to make its way into the plastic scale model market. The plastic base is somewhat basic, and the engineering is not the best; however once you get through the filling and sanding, and add all the PE, you will have a very nice, detailed model in your hands. It does require experience building models and using PE- it’s not one of those “shake the box, and the built model falls out” type of kits. However, the results are worth the effort.

Maco’s offerings are the exact opposite of the Flyhawk models: they are very well engineered and very simple models to build – in other words, they are one of those “shake the box” models. The details are still pretty good, and Maco offers a good alternative if you want to build more than one tank quickly, or if you’re still new at building 1/72 models. (Or just want to have a quick weekend project.) One thing that I need to mention is that the shape of the turret seems to be somewhat off, and you’ve got my bane of small scale models: the moulded-on tools. On the other hand you get some beautiful metal gun barrels and antennae.

All in all, the plastic offerings have things going for them; choosing one really depends on your preferences and your purpose. How much challenge do you want to face? While the Flyhawk kits can be adjusted in difficulty using the alternative options (PE vs plastic vs molded-on detail), a lot of the tiny parts cannot be avoided. The Flyhawk offerings are definitely not for beginners. It also takes considerably longer to build. Another aspect to decide is: how much the lack of PE matters for you? The details on the engine deck grille are good enough in plastic on the Maco kit, and in this scale there is an argument that it does not make much difference. (Talking about PE: only the Armory kit has the wire mesh protecting the engine grilles.) You might also want to have a metal barrel; this is not an option in the Flyhawk line of Luchs’, but you get them in the Maco kits… and so on and so forth. I’ve tried to showcase the strengths and weaknesses of all four models; it really depends on the individual builder which one he or she wants to choose.

Advertisements

The tale of the four Luchs’ – the Maco Pz.Kpfw. II Luchs

Modelltrans’ Luchs

Flyhawk’s Luchs

…and still to come: Armory’s Luchs!

44hxf61

These years seem to be the golden years of scale models. Vehicles that have not been available or only available in the form of limited resin kits suddenly get a lot of attention. The Pz.Kpfw. II. Luchs was one of these vehicles. I’ve built the ModellTrans version five years ago, inspired by the online game World of Tanks, and now, in a very short span of time we get not one but three Braille scale plastic versions of the tank.

I have reviewed Flyhawk’s 1/72 Luchs offerings before, and I was really curious what the other Luchs kits are like. This review will be about the up-armored Maco offering; I’ll comment on the differences between this kit and the Flyhawk kit here and there during the review. (The up-armored Luchs is essentially the same as the basic Maco Luchs with a small fret added; anything I say here is relevant to all Maco kits.)

The breakdown of the model is quite old-school: we have a “traditional” lower hull assembly from four parts (two sides, a bottom and the back). The suspension units and the swing arms holding the roadwheels are already moulded onto the sides. There is an interesting solution for the last pair of braces on the mudguards: they are moulded onto the back panel. The mudguards will need to be slid under the brackets. Be careful not to cut them off; first I thought they were some sort of plastic overflow during the moulding process. As most of the finer details, the back light is moulded onto the left brace.

The added parts are on a separate sprue: the tool box from the back of the mudguards, the jerry cans for the turret sides (these were moved to the back of the tank in the Flyhawk up-armored Luchs kit), smoke grenade launchers, some extra boxes on the back of the turret, a metal armor plate for the lower hull on the front, the perforated vision block protector, and additional track sections protecting the frontal hull. Without this sprue you can build the early version of the model easily.

The interweaving road wheels are done the same way as DML handled them with their kits: the two inner rows of wheels form one part each, onto which you’ll have to attach the outermost row as individual wheels. This solution makes assembly much simpler, and it’s a great solution to avoid any misalignment. The pattern on the road wheels is very well replicated, and the wheels are very thin, which is probably quite true to scale. (Although it’s a conjecture on my part since I have no access to a real vehicle, and neither have I found any information on the thickness of the wheels anywhere.)

The drive wheel is nicely detailed, and the plastic is a tad thicker than the Flyhawk kit’s- this is actually a good thing, because it can easily bend when you are trying to install the tracks on the Flyhawk model. The tracks come as link-and-length, and they are very easy to assemble. (They are probably the easiest I’ve had so far in 1/72.)

The upper hull and the mudguards come as one piece. The model is really “traditional” in this sense as well: the sides of the hull will need to be fitted as separate parts due to the details (viewing ports) that need to be there; no slide-moulds for this kit. The fit is remarkably good, though, so no problems there.

The model does not come with many PE parts: we get the top of the German “crow’s foot” antenna, and that’s it. We also get a couple of brass items: the rod part of this antenna, another whip aerial, and a turned barrel. (The thin metal aerial with the “crow’s foot” looks much more convincing than Flyhawk’s version of plastic rod combined with the metal top.)

The tools -with the exception of the jack, the fire extinguisher, and the shovel- are moulded onto the mudguard; this is something I’m not very keen on. (I prefer painting them separately before attaching them onto the model.) The shovel is a pretty simple affair; it’s probably better to replace it from the spares bin. The model does not have a width indicator; you should get a PE one (Dan Taylor modelworks does a set), or fashion one from stretched sprue. They were too fragile in the Flyhawk kit that I just used PE aftermarket ones instead of trying to clean them up. The tool boxes are slightly different than in the Flyhawk kit, and their locations are not exactly the same, either- again, these could be simply because the models were based on different production versions.

The turret is made out of five parts; the plastic barrel is molded on the top section. Interesting solution (both the assembly of the turret and the gun barrel), and it works. You have an option for a metal barrel, which is nicely detailed. The only imperfection I found with the kit was the grab handle on the back: it was broken and bent during transit. (I ended up not changing it.) The other issue I have with the turret is the almost perfectly rectangular shape of the top of the turret; I think it’s a bit larger than it should be- it’s certainly larger than the Flyhawk’s turret. (Which is also smaller than the ModellTrans turret). The shape is not the same, either. The Flyhawk kit’s turret is more hexagonal: the back and the front are a bit narrower than the middle. In the Maco kit it’s more rectangular. It also looks like the top is a bit larger than on the drawings I found online. The big question is which one is correct. I don’t have access to an actual tank to check, and the photos I found were taken mainly from eye level -for obvious reasons. (If there’s one in Bovingdon I’ll keep an eye out next time I get there.)

The top turret hatch (the commander’s) can be opened. The hatch has interior details, but the rest of the turret does not; it’s probably best to put a figure in it if you leave it open. The back large, rectangular hatch cannot be opened.

The assembly was about two hours -tops; it’s a very well engineered, easy to assemble kit. I tried something new (for me) in this build, and made the whole running gear/track assembly as a single sub-assembly; the whole shebang can be removed for painting and weathering. (I think I’ll use this approach in the future more often.)

The painting was a bit more difficult, as I am not really good with spraying 1/72 freehand camo. I’ve base-coated the model with primer red, and used Mig Ammo’s Dunkelgelb. Obviously neither my airbrush nor my skills were up to the challenge of making thin sprayed on lines, but here I had an idea of pure genius. (If I can be as bold as to call it that.) The Ammo acrylic paints form a cured surface; they are very different from the Tamiya paints. And, as we know from experimenting with the Windex chipping method, Tamiya paints are dissolved by ammonia… I simply made up a 2-3% ammonia solution, and used a brush to carefully clean up the overspray.

Job done.

This is something definitely worth remembering; as long as the base layer is different (either enamel, or, in this case, Mig’s Acrylic paint), you can clean the Tamiya top layer up easily. (I did not take a photo after applying the green, but imagine the yellow areas having a greenish oversrpay all over.)

The weathering steps further helped with the camo issues. Some dust (pigments mixed with water and some surfactant sprayed onto the model), washes all made the base color a bit darker, and helped to fade the green patches a bit. The silver pencil really helped making the model look like a chunk of metal.

I’ve used different colors of mud (in this case I used Vallejo’s and AK’s sets, not pigments). The key is to first use the lighter colors on a larger area (both flicking it on, and by applying with a brush directly), representing the dried under-layer, and then add the darker shades, representing the still wet mud. With a brush moistened with the appropriate solvent (water in case of Vallejo, white spirit with AK) you can -and should- adjust the effect before the layer dries.

Conclusion

The Flyhawk kit is an incredibly detailed, albeit complex model, which will challenge the model builder. The Maco kit is a very well detailed, well engineered, easy to assemble model. Sure, it does not pack as many PE parts and tiny plastic bits, but it does make the build less of a challenge, and the results are still nice. The moulded on detail is convincing, and it is nice to have a model that is a breeze to build. In my subjective opinion it is on the same level as the Revell 1/72 Famo in the quality of plastic, ease of assembly and level of detail. (In other words: pretty darn good.)

It comes with a metal gun barrel, and two metal aerials -things the Flyhawk kit lacks. On the other hand it does not have a PE engine deck grille unfortunately.

In short: if you want to go all-out, and have a challenging build, go for the Flyhawk one. If you want a good, easy to build model, which builds fast, choose the Maco model; in this fortunate case we have an abundance of choice when it comes to this vehicle.

Coming up: Armory’s offering.