Category Archives: death guard

Rescuing a botched paintjob and paint stripping…

ozly2ej

Just a quick post about a disaster.
I did kind of mess up the paint job on a space marine back in the days when I was painting these dudes. I tried to strip the paint using isopropyl alcohol, but it came off in flakes, leaving the surface uneven and blotchy. I was seriously thinking about just throwing the poor guy into the recycling bin- and then came the inspiration.

 

Who else has blotchy, corroded armor? That’s right… the Death Guard. Since I was planning to paint up Morty and some of his pals, I thought I’d give glazes a try on this fella before I move onto the big guys… And what do you know? It actually came out looking good. Remember people: there are no mistakes, only happy accidents!

 

Grim Skull Miniatures: Mortarion

bupgxp9

The world of tabletop gaming has given us better and better detailed miniatures over the years, along with increasingly detailed universes through media like books, comics and computer games. One of my favorite is…

 

how-would-you-like-to-visit-your-favorite-fictional-universe-314969731

 

Warhammer 40K. The picture above will make it clear why.

 

There are enormous gaps in the “official” miniature offerings in the available fractions, and also what is available tends to be somewhat expensive. A lot of smaller companies spotted these gaps on the market, and started to produce similar-but-not-quite-the-same miniatures that are not available from either Games Workshop or Forgeworld, usually for a friendlier price.

Mortarion did receive an official figure by GW, and another by Forgeworld, but I did not like either of those versions. The WH30K (pre-Heresy or Herey era) Forgeworld model did not really resonate with me, and the daemon prince figure looks very different from the man he used to be, twisted and bloated beyond recognition. In case of Mortarion it is an issue. True, the Primarch of the Death Guard Legion had fallen to Chaos, and has been turned into a Daemon Prince since the Horus Heresy. However the lore makes it clear that he is the one Primarch (alongside with Magnus, possibly) who remained as close to human as possible. Grimm Skull Miniatures has issued a Mortarion model that can be used both as a pre-daemon prince Primarch before or during the Heresy, or as a full-fledged daemon-prince (essentially the same figure plus two big, leathery wings). Yes, you can say it’s just lazy marketing. However since he is the most human of the daemon princes, and fans still debate if he could even return to the side of the Emperor again, as his red brother did, there IS a good argument for Grim Skull Miniatures’ choice.

The figure- as all of Grim Skull Miniatures figures I’ve seen so far- is very well sculpted and detailed. These figures are close enough to the “official” GW/Forgeworld aesthetics, but they also differ enough to look novel and unique; frankly I quite like how most of their figures look. The overall outline of power armor mixed with twisting and turning organic shapes look the way I imagine the Chaos-touched warriors. Talking about Magnus: there is also a figure that looks suspiciously like the Cyclops, only Grim Skull took him towards the Maya/Aztec aesthetics instead the ‘traditional’ Egyptian. (I’m not sure what to feel about the overemphasised feminine figures though, but if you like Tau pin-up girls and sexy female chaos space marines, here’s your chance.)

Mortarion, or Morty for his friends, looks exactly like his description in the Horus Heresy books. A gaunt man in an ornate, baroque power armor, with a cape covering his head, and censers hanging from his armor on chains. He has his power scythe Silence, however he does not have his handgun, Lantern. This is a glaring omission of the model; the gun is a prominent feature of the Primarch. Otherwise I do like it better than the pre-daemon Forgeworld figure, or the daemon prince GW model; he does radiate a sort of dark, solemn majesty with his ragged wings and elaborately decorated, corroded armor.

He comes with a pretty nice base to stand on with a broken pipe leaking who-knows-what. (It must be something corrosive because there is a skull in it.) We do get two such pipes; I used the extra with another Death Guard figure.

The assembly of these figures is usually a breeze. I did not like the original pose, because Morty looks like a particular shepherd the way he holds Silence. I turned his arm a bit to make it look more dynamic, although the attachment point is not designed to hold the arm well at this angle. (A scythe is an unbelievably impractical weapon at any rate; at least he should have straightened it, a’la revolting peasants. I think the Death Guard really puts style over effectiveness, when it comes to weaponry.)

The big issue, however, was the wings. There are simply no attachment points where they can be glued to, and the surface touching the back of the figure is so small, it was difficult to secure them even with small wires drilled into them.

The painting stage is usually where these models are made or ruined, and I have to confess I’m not a master painter. My main interests are armored vehicles, so my skills at blending and painting small details by brush leave much to be desired. I don’t particularly stick to the “Games Workshop School of Figure Painting” with the high contrasts and very fine layering/glazing, either. Since I have the daemon prince version, I did not paint him in clean, pre-Heresy colors; he got the full grime, rust and corruption treatment.

I used Vallejo’s black primer as a first coat, and used Lahman medium to create glazes in various browns and greens. I kept adding the glazes in very thin coats until I liked the greenish-brownish hue.

The bronze parts were painted using True Metal gold first (on larger surfaces I dry-brushed it on to keep the black as shadows in the recesses), and then followed it with several layers of oxidized bronze green colors as glazes. As finishing touch I reapplied the gold on rivets, thin edges, and other surfaces where the oxidised metal would be rubbed off.

The different pipings on the armor were painted with dark blue glazes to create a slightly different color without too big of a contrast.

I was uncertain of what colors the wings should have: they look like a cross between an insect’s wing and a bat’s. I did not want them to stand too much out of the general effect, so they got mostly the same treatment as the rest of the figure. The wings received a purple glaze, and the insectoid wing structure was shaded with ochre and brown oil paint blended into the base dry; it does look slightly iridescent and chitinous.

The tabard/cloak Morty is wearing got a similar layering treatment, only in this case I used a white base and added mostly brown colors. As a chaos prince of Nurgle, the god of disease, he can’t really be expected to have a spotless, white attire. (Having one at all is pretty silly since it would get caught in everything and anything.) I added further highlights, shading and discolorations using oil paints. After weeks of drying it is still somewhat shiny… This is a good lesson on getting out the linseed oil out of the oil paint before using it. (Just put a blob of paint onto a piece of cardboard and wait a few hours… Next time I will not skip on this step.) Right now I’ll go with the “can’t you see it’s leather??” defence. It turned out a bit darker than I would like, but there it is. As I said I’m not the best of figure painters.

The base was painted similarly to the figure: several layers of dark grey and brown glazes over black primer, then a little steel and gold True Metal paint drybrushed on here and there. The rubble got a bit of a rust and dust pigments, and the bronze areas got the same treatment as Morty’s armor.

Overall I really like the results -even with my admittedly limited skills managed to make it out into an impressive renderition of this

Warhammer 40k -the Dreadnought division

One of the most appealing thing in Warhammer is the plethora of weird-looking, over-the-top machines and other contraptions of war. Among those are the dreadnoughts – gigantic exoskeletons for Astrates warriors who are too grievously wounded for recovery. These half-dead Astrates are placed into a life-sustaining pod (sarcophagus), and connected to a dreadnought body which they can control using their mind impulse units.
Anyhow. They look cool.

OK, our first contestant is not a dreadnought per se. It is called the Decimator (not a very inventive name), and is sold by Forgeworld. It’s a war engine imbued with a demon by the Dark Mechanicum. Instead of a crippled Astrates, it has a daemon in it. Even cooler.

He has this sad puppy look on his face, though.

Black Legion dreadnought – the Hellbrute

These are surprisingly cheap on Ebay (my endless source of used Warhammer stuff). The whole Dark Vengeance boxset is being sold separately, which brings the price down to about five quid. It’s supposed to be a maddened, chaos-corrupted dreadnought who is chained down until the time of fighting comes. He has became this strange organic-mechanical fused being, who is driven insane by this change. So he is suffering while he is slaughtering everyone, which, I’m sure, is a consolidation for all parties involved. I decided to paint him a member of the Black Legion, because red is a bit of a cliché by now. The bases in all cases were done using spares weapons and space marine bits -which (surprisingly) I got from Ebay by the bag. The earhwork was done using actual soil from Compton mixed with white glue, and airbrushed with some other earth colors here and there to give it some tonal variation.

I tried to make the stands a bit more interesting. I might have gone a bit to the gory side with our Dreadnought stepping onto an loyalist Astrates warrior. The blue does give a nice contrast, though.

Ultramarines dreadnought

This guy is a boring, run-of-the-mill Ultramarine. He was my first… To make him more interesting I did some surgery on an ultramarine figure; he is supposed to be a wounded Astrates being protected by his big brother in a firefight. The pose was surprisingly easy to do: just cut off the armor sections, and reconnect them using green stuff.

Death Guard dreadnought
This guy is my favourite. Out of all the corrupted Legions, the followers of Nurgle are the most unique. It’s a Forgeworld offering, and not even that expensive. If you’re lucky -or patient enough- you can get a used one from Ebay. I did. This meant I had to repair and repaint our friend. It was reprimed in black, and then successive layers of greens, olive greens, and browns were added using an airbrush. The final color-variation was provided by a lot of filters: burned umber, brown, green, and yellow.
Once all was dry the detail painting took forever. The boils were pained with deep red, and then added orange and yellow; the gun was painted with rust colors, the horns were painted in yellowish bone shades. The thing to keep in mind was not to use a single color for anything; everything was done in at least three-four shades.

I swear I have nothing against the Ultramarines. I think I just take them as the archetypical loyalist forces, as they were the very first ones I’ve seen.
I’m actually quite pleased with how the boils came out, but to be honest this guy must be stinking to high heaven.

Calas Typhon – Forgeworld

This is one character who started out as a gigantic tosser, and ended up being an ever bigger one. With the Heresy what is most interesting is to see what drives people to turn against the Imperium. Sometimes these choices are agonizing for the characters who make them; and you cannot really help but feel sympathy towards them, even after they become a twisted caricature of their former self. (Think about Lorgar himself; or Khran, who already was featured here.)

Thypon (or later known as Thypus) has, however, never been a nice person. Always arrogant, always sneering, always self-righteous; it’s hard to find anything likeable about the guy. (He does sport some amazing beard, though.) Let’s face it, he is somewhat of a one-dimensional anti-hero.
Nevertheless, the Forgeworld figure is just incredibly good-looking. The heavy stride of someone in heavy a Terminator armour captured incredibly well. You can hear the footsteps, you can feel the tremor of the earth, and you can clearly see that this armour was not designed to be jogging in it. It also looks pretty realistic; my biggest issue with older iterations of Terminator armours is that they look unwieldy; just look at an old Games Workshop Abaddon figure to see what I mean. He literally is forced to keep his arms up in a threatening pose, because he cannot physically bring them lower towards his torso. (Which is good if you want to threaten someone, but bad, if you want to actually do anything else. Like moving.) The new Forgeworld Terminator figures -while it’s clear that the wearer will not do splits in them any time soon- look more realistic as power armours go.
The kit is also a good starting point for the character himself. This is the original state from which he got corrupted into a plague Marine, harbinger of disease and corruption.

This guy.

Citadel Finecast did come out with a Chaos corrupted Typhus before, and you can see the similarities between the figures.

The sculptor at Forgeworld used this figure as a basis, and he made an excellent work.
Since the Death Guard is under the influence of the Lord of Decay, Nurgle, they are quite foul creatures. I tried to depict the beginnings of receiving the favours of this Chaos god might look like: the originally granite-grey armour got a yellowish sheen, representing a thin layer of filth, quite possibly excreted by the amour itself. He has made his first step in the path of corruption. I’ve also used transparent paints I use normally to simulate fuel stains on tanks. One brilliant thing I realized was that the usual problem with washes (namely the wash dries in a way that the pigments in the wash flow towards the edges of the wet area away from the cracks, which look bad if you use the wash to accent shadows) actually look pretty on-spot with Typhon -after all, his armour does excrete some foul substances, which will dry in patches on the surface.
Scratches in white, and white highlights helped to bring out the details; I’ve also used very thin dark washes to further enhance the whole oily-filthy impression. Most of the metallic parts were painted in dark, oxidated tin color, although not yet in the greenish hues of old, oxidated bronze. The edge of the Power Scythe was highlighted with light blue/white to represent the force-field; perhaps I should redo it in green to stick to the whole corruption/disease theme. (Blue is always a color of purity; glowing green, however, is usually reserved for containers of super-diseases and biological weapons in popular lore.)

To be honest, the base caused the most problems; I just could not get the colors right. I tried different greys to depict the broken concrete, but it just did not look “real”. The breakthrough came when I realized that the “right” look can only be achieved using layers and layers of different grays and browns. I’ve kept drybrushing with different colors (metallic colors included at places), using different highlights, adding filters, washes and pigments; after about a month of working on it on and off, I decided it looked good enough to stop.

Well, here he is, striding into corruption, massacring loyalist forces with his arm-mounted flame-thrower/chemical weapon. (I think flames would be too “pure” for a Nurgle-champion; it must be some chemical contortion that melts metal as well as flesh. Whatever it is, it looks pretty cool, although I do suspect the short barrel causes some accidental drips onto his own armour now and then.)

A simple Warhammer 40K dio brought to you by Ferrero Rocher -part 2

This is my second foray into the world of Chaos Space Marines. This little diorama was created to provide a safe base for the Dark Vengeance Astrates I have got from Ebay, using a Rocher Ferrero box as a display case. I did not really have a concept in mind aside from depicting the characters as advancing on an unseen foe. (This was due to the small size of the box; had there been more space available, I could have put in a dreadnought or an Ultramarine Terminator as an enemy to advance upon. (I did buy a couple of models off Ebay over the last couple of years, but only now have I started to actually finish them properly. A lot of the models I got needed extensive surgery or their paintjob stripped, as I got them cheap and used, which hindered the work. Mostly due to my laziness, but still. Buy new if you can help it.) The other big push to actually start taking painting WH40K seriously was the fact that my landlord was giving up the hobby, and he sold me his paintset for ten quid. And we’re not talking about the starter set… we’re talking about a HUGE box of paints, washes and inks. I started to watch videos about blending, how to paint fabric, and all the other tricks of the trade – so I found these little figures a welcome variety from the dull-colored tanks (and they look awesome in general).
Anyhow, here is the second box of Chaos.

The figures themselves are brilliant: their poses are very dynamic, and the details are just amazing. The only issue I had with them was the seam lines which were sometimes on very visible- and hard to reach places. Most of them were filled in, but I’ve left one or two untouched because I was worried about the potential damage to the surrounding detail. Since then I got a bottle of no-sand putty from True Earth; this should help next time.

I tried to give these guys some justice (since they got none from the Emperor…), but this is how far I got. The Emperor’s Children warlock (I think… that third eye must be a sure sign of psychic powers) got completely dark eyes – ever since I’ve read about Daemonhosts in the Eisenhorn trilogy I liked this idea of the absolutely black eyes without the whites around the iris. I guess it’s not far-fetched to imagine a sorcerer who is possessed by a daemon, so this works out fine. The only thing I forgot to do before taking photos was to apply some matt varnish to the cape; it is too shiny to be a convincing fabric.

The most loving care was given to the Death Guard with his axe. His armor is probably not going to be shiny and clean; but I did not want to go for the full-on “puss filled boils and rust” look, either. I made him unclean looking using some oil washes, and the “fuel stain” product from AK, and used different browns, reds and organges to make his axe rusty-looking.

The Dark Angel was the less inspired of the three, as I don’t know much about these guys yet. The whole paintwork started by priming him black, and then trying my hands on the Citadel line of inks – it worked well to produce a deep dark-green color. The orange gem on this chest does need some work yet, I admit.

I used some pigments on the boots and fabric to depict dirt -after all, they are on a muddy battlefield-, and called it a day. The diorama base was prepared the same way as the previous one -using cork as pieces of rock/concrete buildings (at this stage it’s uncertain), and weapons and armor pieces from the spares box to add some variety. I ended up using actual earth mixed with white glue as a base with different shades of pigments sprinkled on top.