Category Archives: ak interactive

Dusting it up -Vallejo wash and AK Interactive pencil

We talked about the issues of gear acquisition… I can’t help myself, apparently. (OK, chalk it up to natural curiousity; it is not as bad as if I bought the entire range of both products on a whim, right?) While I am still trying to finally apply some paint to the Markgraf, I can do smaller projects. (Seriously; getting time to do some airbrushing is impossible… and since smaller projects will end up at the stage where airbrushing is required, it is getting more and more impossible as models pile up on the “to be sprayed” pile.)

So I have Vallejo’s dust wash (which I was playing with before), and I bought an acrylic pencil by AK Interactive, to see how it compares to my “normal” acrylic pencils bought in an art store.

 

 

I have chosen two tanks from my shelf – it is actually quite good to keep working on older models (as I have done previously). This was Cromwell’s T29 and OKB’s UFO tank (Object 279).

What I did was to first apply the dust wash on the fenders and wheels, then adjusted the effect with a wet brush. This I did several times until I got a nice blend. Then I used the pencil (wet the tip, first), deposited some on the tank (only on a small area), then adjusted the effect with water. Sometimes I found it was better to make a “wash” in situ by adding a lot of water; sometimes I just feathered the edges to form a natural-looking dust deposit (on the sides of the fenders on the T29, for example.)

Here are the comparison photos -the before and after shots.

The dust did improve the look of the tank, but I found the Vallejo wash to be more useful in this regard. It made the stark contrast on the lower hull and the fenders much better looking.

The pencil has a very light color, which is not necessarily realistic (it looks like the tank drove through a cement factory), and it does produce tide marks when used with a lot of water (problem with water-based products; the high surface tension drags the pigments on the side), and overall does not cover the area as smooth as an oil paint-based (home made) dust would do. It did make some very nice dust streaks on the vertical surfaces, though.

A little bit browner, darker color might be better for dust, but overall, not bad.

 

 

Well, the photos definitely need some improvement (the new light box does not seem to be very good), for one.

 

Let me know what you think of the results.

Vallejo Model Wash – European dust 76.523, oiled earth 76.521

mlrfaa5

Acrylic weathering products, while being very attractive due to not being hazardous, tend to have a big issue: surface tension. Solvent-based products, washes spread much better, and they do not leave “tide-marks” like water-based products do; therefore I was pretty interested in how Vallejo’s dust washes perform.

In short: very well.

(OK, you can stop reading the review if this is all what you wanted.)

I used the road wheels of an old Panther build I left unfinished (but will finish, I promise) to see how these washes perform on a complex surface. I simply applied them with an overloaded brush, and let them dry. It spread nicely, just like a solvent-based wash. (Perhaps Vallejo used a surfactant.) The results are nice: subtle, dusty look.

 

The second and third photo shows the difference between treated and untreated road wheels (one of the reason I chose this as a test-bed: to have a control group right next to the treatment group), and the last photo shows the differences between heavy application (1), light application (2, somewhat diluted with water), and nothing (3).

 

I also tried three consecutive, heavy applications with the following results

vqwz5lz

It might be a good look for a vehicle in very dusty, dry environment, but probably not the best way to use it the product like this. The best way to use these washes is to form a subtle accumulation of dust in crevices, not flooding the surface with them. As a general rule: using more than one technique with a light touch to achieve a certain look will more likely create a realistic finish than using just one technique with a heavy hand. This means that these washes will not provide a single step solution for creating dusty-looking surfaces, I am afraid.

 

I also tried the washes on a piece of scenery a Witcher figure will be walking on, to see if they can be used on the groundwork for good effect. (The paint on the resin base is by no means finished; I was just testing some paints on it.) Regardless of the underlying paintwork, I think I can safely say that these washes can add a little more realism to the soil both in tone and in texture -see the above rule.

Overall, these washes are pretty neat; worth checking out.

AK Interactive Acrylic Primer – Dark yellow

 

Well, this thing gave me the hardest times for a long time… it just did not come out right out of the bottle. It is supposed to be a primer you can spray right out of the bottle, and even after extended shaking, it came out all runny and thin; hardly something you would like to have with a primer.

But last week I gave it another go. I shook the bejesus out of the bottle, and tried it again.

The results were quite satisfactory. Unlike the Vallejo primer, which forms a thin membrane of paint over the surface (kind of like the Mig Ammo paints), this goes on like “normal” acrlyics, more like a Tamiya paint, and dries absolutely flat. Both are great, it is only a matter of preference.

Overall, I really like this primer now. The only downside is that the bottle is designed in a way that makes it difficult to see the bottom; it is hard to tell if the paint is mixed up correctly.
So all I can say is that you have to shake it, shake it, and shake it some more before using, and with this thought I will leave you with a relevant video clip.

 

 

 

 

Vallejo Acrylic Polyurethane Surface Primer – German panzer grey

Since the post about the gear acquisition syndrome I thought I might as well make a more conscious effort to write short reviews of the stuff I bought. (There are a few, but they were never the main focus. Nor will they become the focus, but I might as well write about them in a more organized manner.) I do not intend to write long reviews; just my impressions with a couple of photos included. (If you have products you want to have reviewed, just contact me.)

Let me know if this idea works…

 

So. Vallejo Primer.

What can I say? It’s great. So far I had no issues with it; it works like a charm. It is a thick liquid, which can be applied straight from the bottle by brush or airbrush -a big plus, in my mind. Simple, no chance of mucking up the dilution, safe.

It forms a really tight gripping surface on the model for paint to stick on, and can be used for pre-shading in one step. Several colors are available; I only have this one. The German Grey can be used as “scale black” in many cases, by the way. I also use it as a chipping color when I don’t feel like adding rust browns to the model; if you use the hairspray technique with it, the results are pretty convincing.

It dries quickly, but you really should wait a day before applying further coats of paint.

See examples from this blog: FV4005, Turtle, T-55AM, Straussler. FT-17.

In short: recommended.

Artel W Miniatures – Eisenhorn (Inquisitor)

bln9inm

I always loved the dark, hopeless world of Warhammer 40K (look up Grimdark when you have some time).

This is an universe where even the good guys are worse than any actual historical monster you can think of: a collection of xenophobic, genocidal maniacs in different shapes of forms -and that’s only the Imperium of Man. Superhuman, gene crafted soldiers who think themselves as actual Ubermensch, the Imperial Guard, an armed force that throws millions into the meatgrinder without a thought, and of course the shadowy and all powerful Inquisition that oversees the civilian aspects of life in the Imperium. Add to this all the external threats: aliens, renegades and heretics, and you have an empire that is held together by tape and strings, threatened by multiple external and internal forces each of which could spell its doom it by itself, let alone together. So what’s not to love?

There’s a huge collection of books published by Black Library set in this universe; and a large portion of them are frankly no better than some badly written fan-fiction. However there are gems which are great on their own rights, and they are absolutely worth reading and re-reading. The Eisenhorn Trilogy is one of these book series which is a really, really good story regardless of its origins. (Space fantasy tends to be looked down upon by the “purists” of the SF genre, hence the second part of the sentence.)

The series detail the journey of an Imperial Inquisitor, Gregor Eisenhorn from a young idealist on the path of corruption and ruination. Due to external circumstances and small, seemingly unimportant or small actions and choices of his own he becomes something he would have recognised (and executed without a thought) as a heretic in his youth. The story is complex, and quite an interesting one; after all, the same path is trodden by many people who acquire power. Why I like the story (apart of the quality of writing, of course) is how easily it can be transposed onto our own real world: very few people start out with the intention of becoming corrupt, or do evil. Corruption comes gradually with seemingly small and insignificant steps, yet it will twist the person beyond recognition. (Not to mention Eisenhorn remains true to his mission: fighting for humanity, which adds an extra layer of complexity to the story.)

Since I love the story, I wanted to make an Eisenhorn figure, of course, which can be an issue in WH40. Not all characters have figures available, not to mention the silly poses (it seems like everyone and their mother are shouting and pointing at stuff in the grim future). It is fair enough because they WERE made for a tabletop game, but for a modeller it’s a definite problem if you want your figures in a more dignified (and realistic) pose. In case of this specific figure the pose is actually quite nice (and he has his signature sword), the proportions are good, but the problem is that the figure is out of production and hard to get. Not to mention it depicts our favourite inquisitor towards the end of the trilogy; I prefer him in his prime.

Enter the blooming resin industry. There are several companies producing alternatives, conversions for the WH40/Warhammer games; these are miniatures that are not nearly enough similar to the originals to be considered as copyright infringements, but they are close enough to be clear what they supposed to represent. A lot of these conversions and figures are produced because there are holes in the market (if there is no available set by GW; for example conversion sets for space marines for specific legions or chapters), or straight-out improvements. In case of the Chaos Rhino, Mortarion or Abaddon figure in my opinion they are definite improvements, for example. And now we review Eisenhorn, produced by a Russian company, Artel W Miniatures. (Shortly after this figure was issued, WG announced that they were coming out with a new Eisenhorn figure, so now we have three… Choice is a good thing.)

eisenhornmodel-jan29-image7ju2b252812529

The name of the miniature is very close to the originals, so it is abundantly clear who it refers to, even if you don’t know the iconic painting of the inquisitor (which actually inspired the books according to the author). The figure essentially copies the artwork: we have Eisenhorn strolling forward with a gun and a tube in his hand, his runestaff mounted on his back. (This setup puts the figure to the last few chapters of the second book, or the first chapters of the third.)

The figure comes in a very impressive package: a box wrapped in brown paper with a wax seal… I have to say I felt quite reluctant to open it, as it had this exclusive feel to the whole set. It’s a feel definitely something you don’t really get when you get a blister pack. (Admittedly it’s not a priority when you buy something, but still.) The paper covers a cardboard box, which contains the few pieces of the model itself, sealed in ziplock bags.

The model consists the torso with the cape, the lower part of the body, the two arms and the runestaff. His iconic power sword is not included, but to be fair it’s not on the original artwork, either. Regardless, he should have Barbarisater on his hip. (Quite possibly the tube could be replaced with a sword.) Despite of the small size of the figure the detail is very fine and impressive; the chains, the folds of his clothes, the inquisitorial rosette, the gun are all very well defined. The expression on his face (which is anatomically well proportioned) is quite grim, but this is the only appropriate expression for him, as you will learn from the books if you have not read them already, so that’s quite on the money, too.

The assembly is very quick. There’s very little cleanup required: mostly the parts where the torso meets the lower body. There is no flash on the bits. The arms fit into their slots well.

Painting was a joy- but I am not a master by all means. Only after looking at the photos do you realise how hard it is to paint a miniature on a professional level for the box art (like the above examples of GW’s minis). When you look at this figure with your eyes it actually looks pretty good. Once you bring out the macro can you see the imperfections and mistakes. Oh well. I can always claim to be an amateur.

The leather overcoat was base colored using snakebite leather, and then layered lots of different brown oil paints on top, trying to achieve the leather effect. The cloth underneath was painted regal blue, the trousers antracite, and the boots gloss black. The stash and the parchment of the purity seal was painted white, and were given a coat of brown filter. The metallic details were painted with AK Interactive’s True Metal gold and steel.

The runestaff was painted with a mixture of these metal paints; the skull in the middle was painted deep green, and some random smears of lighter green and black, covered with nuln oil. (It was supposed to be carved from a warp-infused stone. There you go: here, on this blog only, the sole accurate Eisenhorn Miniature in existence…)

Basically, that’s it. It’s a high quality miniature of an iconic character from the WH40K universe; if you missed the original “official” figure, or don’t like the newer one, now is your chance to get one for your collection. His nemesis/ally, Cherubael is coming soon.