Modelcollect 1/72 Waffentrager Ausf. E-100 with 128mm gun

uyif0ci.jpg

Modelcollect seems to specialise in two types of Braille scale vehicles: post-war Soviet-Russian wheeled and tracked vehicles, and the increasingly esoteric WWII German what-ifs, paper panzers and artillery (rockets and guns). Some of those were actual plans, like the E series of tanks, but a lot of them are just pure fabrications, like the walker-type tanks, and the different modifications based on the E series. They also make a 1/72 scale P1000 Ratte.

 

The topic of this review is a fictional vehicle, albeit a fictional vehicle from the online game World of Tanks. In the game it was a game-breaking tank destroyer with a four (or six, depending on the gun used) shot autoloader.

Eventually it was removed as it was overpowered as heck, but I was really happy to see it in plastic form. (Never had a chance to play it, but it sure was satisfying catching one in reload…) It is essentially a 12,8 cm Kw.K. 44 L/55 gun mounted on an E-100 chassis in a large, open turret and an autoloader. It is very interesting to see the effect of a massively popular game on the modelling world; I do hope more models will follow. (Amusing Hobby seems to follow a similar pattern; they have issued the same model in 1/35.)

The instructions do have some sort of a history for the type, but as the type itself it is absolutely fictional, it is not something to be taken too seriously.

 

The kit

The box is your typical Modelcollect box, with a nice painting of the tank destroyer on the front. The plastic is good quality, although there is flash around certain parts; especially the drive wheels needed a little cleanup. The detail is OK, and we do get some PE for the engine deck screens. We do not, however, get a metal barrel, which is a shame, especially considering that the massive gun needs to be glued together from two halves; it’s quite an old-school kit in this regards. (I really like Modelcollect’s Russian MTBs; they are true gems with all the PE and metal barrels provided. This model is definitely a bit more of a ‘budget option’ compared to them.)

 

At first glance the part number is quite high, but this is somewhat deceptive. Since the model is made out of several other Modelcollect products, naturally there will be a lot of leftovers after the construction.

 

The assembly is not very difficult; beginners will find no real challenge putting the model together. For some reason the roadwheels require you to glue little plastic rings between the wheels, similar to the 1/35 polycap style wheels, which is somewhat puzzling. (There are two caps fewer included than would be necessary, but they are not actually needed for the running gear’s assembly; the wheels can be glued to the swing arms without them without any problems.)

The large gun-shield is an elaborate piece of plastic; due to the injection moulding process a few moulding lines will need to be sanded off. The bottom part, however does not fit perfectly to the top; it’s not a huge issue, but I definitely needed to fiddle with it.

The tracks are the rubber type vinyl tracks, so installation is simple, although I do prefer the link-and-length option that is provided with other Modelcollect German superheavy tanks. (It is a personal preference, admittedly.)

Since the large gun shield covers quite a lot of visible detail, you will have to do most of the painting before final assembly.

After priming and applying the base coat of dunkelgelb (Mig Ammo), I messed up the free-hand camo, so I decided to give a try to the Mig Ammo washable white… Nobody will know I am covering up a mistake, will they?

After wearing the white down a bit with a wet brush, I started weathering. I wanted to do a really heavily weathered tank… a tank that is going through the longest winter ever – a tank from Westeros. Streaking dirt, mud and everything you can think of… I just piled it on. I used oil paints, mud products and pigments by Mig Ammo and Vallejo, filters of different color (even green – interestingly it gave a depth to the white color), acrylic paints, acrylic and a silver pencil. The results are pretty nice; I now have a weathered, battered veteran on my shelf.

 

 

2 thoughts on “Modelcollect 1/72 Waffentrager Ausf. E-100 with 128mm gun”

  1. That has come out looking very nice. I’ve noticed the increase in WoT themed releases in recent years. It would be nice to think that some gamers have tried scale modelling because of it.

    Cheers,

    Pete.

    Liked by 1 person

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s