When I was told I had a chance to review a model that has not even been issued yet, obviously I said yes; after all it is a rare opportunity to get your grubby hands on something so fresh out of the moulds. An added point of interest is that Armory is mostly known as a producer of high quality resin and PE aftermarket company, and their foray into the plastic scale model world is quite an interesting -and daring- step (with other resin manufacturers following suit lately).
The subject of this kit is a fictional vehicle from the popular online game World of Tanks; it it a German superheavy gift tank given out at Clan Wars, and in general it is regarded as a less-than-effective tank in-game. (Well, it might be an understatement. It’s called the Fail Lowe…) It is possible that it was an actual plan during the war, but it does not really make a difference if we call it a paper panzer or a ‘46 German tank, really. Amusing Hobby issued it in 1/35 scale; now we have a more manageable sized 1/72 version.
Armory seems to be interested in fictional German tanks for their injection moulded kits; this is the second of such vehicles, and share several parts.
The hull has a complex shape, and the surface seems rough in several places; I needed to sand the round part on the back, for example. There are no attachment points of the interlocking armor plates simulated where these plates are normally located, which is a shame (where the frontal armor meets the side armor, for example.)
The PE is top-notch, which is to be expect of Armory; they have a long experience with producing PE conversions for both armor and aircraft, and full resin/PE models.
The model is not difficult to build, even without instructions (I used Armory’s Lowe’s instructions, the 3D renders, and the Tanks.gg website during the build). The hull is a conventional assembly of several flat parts; we don’t get a “bathtub” like lower hull. The fit is reasonably good.
I chose to assemble the running gear and the tracks before adding the mudguards.
The running gear’s attachment points are somewhat flimsy and weak; the wheels can detach quite easily after assembly, so be careful. (This seems to be a common issue; I had some problem with the running gear of Modelcollect’s E-100, too.) The idlers are done in an interesting fashion: the individual disks had to be glued on a shared axis. I did have to enlarge the holes on these wheels.
Since I did not have the instructions I was unsure how close the tracks needed to be mounted to the hull; it turns out I mounted them a bit closer than should have, and it meant some trimming and cutting, which is somewhat noticeable. (You won’t have this issue if you use the instructions, but I felt important to confess, since it’s the result of my circumstances and not the model’s fault.)
And this is the part where we come to the less-than-ideal part. The mud guards have small protruding sections sticking out to help with the attachment; these should fit into the corresponding holes placed on the side of the hull. The fact is that they don’t fit; the mudguards are quite thick and chunky, and the holes are not wide enough. This is a recurring issue with the model: several plastic parts are somewhat thick, which suggests a need to refine the plastic injection moulding process Armory uses (or replace the mudguards with PE parts…). Interestingly other parts, such as the tools and towing hooks are very finely moulded.
The top of the hull is a little bit wider than the bottom, which required some sanding to bring them to the same width. The top part is sitting on the top of the sides, which means there is a seam to be filled on the side.
This leads us to the next issue: the need for filling seams. The fit is not as good as to eliminate the need for filler. The seams between the mudguard and hull are quite wide and need to be filled. The triangular parts on the side under the round section also need filling (and they have a sink-mark as well). The turret also needs some trimming and filling to fit properly. The armored mantlet does have a seam on the artwork,so I decided not to touch it. Due to the nature of the moulding process, the muzzle breaks (there are three options to choose from) have also seams to fill, which is a bit more difficult due to the fine details. If you are patient, it’s worth drilling out the holes.
As I said the PE considerably improves the model; the engine deck grilles, etc. are very nice additions. I switched some tools to DML ones as I had those pre-painted; I also put on a 1/35 rolled tarp on the mudguard.
Overall, once I finished with the fitting and filling the build became quite enjoyable. The model looks unique, and once it takes shape, it’s a cool little thing to work on.
I chose a fictional painting scheme with my fictional tank, and used silly putty to mask the dunkelgelb parts. The Dunkelgelb is a mixture of Mig’s two kind of Dunkelgelb colors (mid and late war). I’m still a bit conflicted on these paints; if you use them right they do spray on nicely, but the fact that they form a cured layer makes them a bit less attractive for me. I’m used to the Tamiya paints, and I really like the fact I can just “mist” them on. I’m not sure I can do that with these paints.
The green was Tamiya dark green lightened with a lot of tan. The triangles were hand painted once the paint was dry. The model received a pin wash of dark brown to bring out the small details. (Looking over the photos I realized I forgot to paint the periscopes… this is something I’ll remedy tonight.)
As usual I applied filters (light brown, in several layers) to lessen the contrast, and added mud to the bottom of the chassis and running gear using pigments mixed with white spirit.
The decals were applied in a haphazard manner. I made up the identification numbers (birthday of my wife, if you really want to know), and put on the charging knight because I quite like the figure. I sealed everything with Testors dulcote.
Several layers of subtle streaking was added using AK’s Winter Streaking Grime. The photos bring out everything incredibly stark; they don’t look as strong by eye. It’s actually a good idea to take photos just to see the mistakes; it’s incredible how much more critical the camera is… (It also exaggerates the weathering effects, so keep that in mind. You can please the eye or you can please the camera; rarely can you do both…)
I used Tamiya’s makeup set on the whole model; it got a nice, uneven coat of dust (dark dust on the lower part, light dust on the upper part), which was followed by Mig’s washable dust on the horizontal surfaces. I did not use the product “straight”: I heavily diluted it with water, and added small patches where I thought dust would accumulate. With a clean, wet brush I could spread these patches, and remove the excess quite nicely. I did not add paint chips to the model; I thought I’d keep it relatively pristine. The edges got the usual treatment with a silver pencil to give a metallic shine to the model, and I declared the tank finished. (Prematurely, as I just realized, since I forgot to paint the periscopes, and lost the radio operator’s machine gun barrel somewhere in the weathering process… Let’s say he removed it for maintenance, and leave it at that.)
And that’s it, really. The model is OK; it’s not a high-tech Flyhawk kit, but it’s not bad, either. It’s something you are used to if you work with Eastern European Braille models, with one exception: the basic plastic is greatly improved by the brass barrel and extensive PE. I think it’s pretty impressive that a mostly resin/PE aftermarket company is moving to the injection moulded model market; it’s something OKB and other companies seem to be doing, too. Exciting time for the 1/72 market, that’s for sure.