1/35 Zvezda Panzer IV (Sd.Kf.z 161/2) ausf H. part 1

2017_06_04_042

I have built Dragon’s offering of the Pnz. IV., so obviously I was curious what Zvezda came up with. They come from two very different philosophies: DML crams in as much detail as they can with PE, individual links, metal barrels, and the whole nine yard in a highly complex, high-tech kit. This comes with a higher price tag and a much higher part count. Zvezda, on the other hand, goes for a more budget option for both time and money with their newer kits. They provide good detail for a much lower part number and much lower price. The build is much faster and simpler; the price you pay for this is a couple of compromises in construction and options. In short: this is a perfect model if you don’t want to spend too much money or too much time on a build, or if you are only getting into “serious” building and don’t want to bother with PE and individual tracks yet. It seems like Zvezda spotted a gap in the present market: good quality, cheap and easy to build models. With the present trend of expensive, highly complex kits, newcomers to the hobby (who are usually young and have no income on their own) are usually left out of the equation; it seems like Zvezda’s offerings might make it easier for them to stay in the hobby.

Zvezda’s offering is a bit strange in one respect: the side skirts have very nicely textured Zimmerit, however the hull lacks it completely. This leaves the model builder with two choices: either apply Zimmerit to the whole of the tank, or buy/fabricate new side-skirts without the coating. I chose to go with the latter as I personally don’t really like the look of Zimmerit. (If you decide to dress the hull up, there are alternatives: PE, resin or even home-made one using putty.)

Overall the model is quite accurate as far as I could determine, with some issues of the drive-wheel. There is little flash on the parts (the only case I found was on the drive wheel), and the detail is quite good. The weld seams are reproduced very well, the lettering on the rubber rims of the road wheels is visible (although not as sharp as on the DML and newer Trumpeter models), and the no-slip surface of the mudguards is very well done. The Zimmerit pattern on the side skirts is reproduced very well; the problem is that now you have to apply Zimmerit to the hull if you plan to use them. Another issue is not specific to the Zvezda model: the side skirts are given as one unit, all the armour plates moulded as one part. If you wish to depict them in a more realistic position, you will have to separate the different plates (shouldn’t be a problem). The thickness is quite out-of-scale, too, but once assembled it should not really be that apparent.

 

Since I have a Tank Workshop interior for the PnzIV ausf H I decided to build it with this kit. I was planning to get a DML offering, but facing another 1000+ part build was just too much. The Tamiya kit is showing its age, so Zvezda it is. (I wanted to avoid the problems of the Tamiya model: rubber tracks, detail, gun barrel- all issues that would require aftermarket products.) Because the interior set is designed for the Tamiya kit sometimes the fit is not the best. The interior set itself is OK, but there are more detailed options out there -Verlinden’s for example. With the current bonanza of full-interior kits, resin sets became somewhat of a last-ditch option.

Since the turret basket and the gun is actually quite nice in the Zvezda kit, I am using the plastic parts instead of the resin; most of the Tank Workshop set goes into the hull instead.

The ammo storage is quite rudimentary: just pieces of rectangular resin. The driver’s and radio operator’s station is quite well detailed; the problem is that the transmission is largely hidden by the model’s upper front plate. None of the front hatches can be opened; I think I might try to cut open the large middle hatch.

The radios’ backs are also featureless; these were placed into a metal rack, which should be visible when you look at the back of the radios. Thought about fabricating something, but then I just skipped this part.

The transmission is actually quite nice; can’t wait to see it painted and weathered.

Well, this is it so far… next step: finishing up the interior, painting and weathering it. Keep tuned in.

Advertisements

One thought on “1/35 Zvezda Panzer IV (Sd.Kf.z 161/2) ausf H. part 1”

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s