Tamiya T-55A and the whole nine yards part 4.

q6m59sp

 

Please find the first, second  and third part here.

To be honest this approach of aftermarket bonanza is going to the way of the dinosaurs. MiniArt has just announced a T-55A with full interior.

Finally finished with most of the build. Getting closer to the end… Smaller jobs are finished. I did the back of the turret as best as I could. I zoomed into the box art photos of the Miniarm set, and tried to figure out what goes where. Somewhat unsuccessfully, since the instructions are frankly quite bad, too. (The PE parts are not numbered correctly for one. As mentioned the reference photos are bad, too…) The extra magazines for the machine gun mounted on the back had some hiccups. First of all I only had five in my set, not six. Second the PE straps that should have been going around them were short. What I did was simply cutting the straps in the middle, and attaching them to the front first. I added the handgrabs, and the wires to the smoke candles – soldering wire is incredibly useful for these tasks.

Well, I did the best I could -and had patience for; this will have to suffice.

I also attached the mounting points for the anti-HEAT sideskirts. Many tanks were not equipped with it, but since they are there, I might as well use them. I started with the middle section on the left side, as it has a special shape (due to the exhaust port), and used it as a reference point for the rest. The back unit is shorter than it should be, and the front overhangs a bit; somewhat annoying but easy to solve with a blade. (I simply fitted the cut off piece from the front to the back.) I’ll leave the side-skirts off for the time being; they will be attached once the main color is applied.

Tamiya wants you to make your own towing cables; it certainly makes more sense than MiniArt’s optimistic approach of prividing them as straight plastic parts. I normally use picture hanging wires for this role; it’s very life-like, and behaves like cable.

I snapped a couple of photos using my phone (hence the quality), and called it finished.

 

 

So this is where I am right now. The tank needs a base coat, and then painting can commence.

Keep tuned in…

Advertisements

2 thoughts on “Tamiya T-55A and the whole nine yards part 4.”

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s