1/35 MiniArt T-54-1 build review p.2

The first part of the review can be found here.

So the hull interior is reasonably finished, but I had to add bits and bobs (fire extinguishers, ammunition for the main gun and for the machine guns, etc.). Once I put the driver’s periscopes in place, I could close down the hull. The top part is really thin; I suspect it’s quite close to scale thickness.

 

Fitting the mudgards was not straightforward: the locator pins did not fit into the corresponding holes on the sides, so there was a tiny gap between the mudguards and the tank’s hull. I simply shaved the pins off. The plastic mudgards are quite thin, and the long parts had a slight bend; the solution was to glue them in place in two steps, straightening them out in the process.
The drive wheels have very small attachment points to the swing arms; since it’s a static model it’s not a real problem, but I still prefer a bit more robust connection.
The tracks are -correctly- narrower than what was used on the final production version of the T-54 (as a comparison I’ve used an individual track link from a Trumpeter kit on the photo). You need 90 per side (the resources I’ve read specified 91 for the actual tank), and you have an option to use a special link for every 20th track link. These links don’t have teeth, and are specially designed to mount the cleats that allow the tank to get better traction on snow or other difficult terrain. Unfortunately it’s not specified in the instruction, but that’s what you can use them for. (The instruction manual shows the cleats in a stored position on the mudguards.) The cleats in their storage position require some really thin plastic pins to hold them in place: first, the holes on the cleats are too narrow, second it’s almost impossible to clean these pins of the sprue gate… so I just used some thin evergreen plastic to replace them.
The headlight has an option to attach a protective wire cage around it; the plastic was very thin, and snapped the second I tried to remove it from the sprue, so I chose the other option.

 

Parallel to the work on the hull, I was working on the turret as well. As I mentioned I’ve been doing a lot of painting and weathering before ataching all the necessary parts, so only time will tell if they will stand out or not after all is said and done.

I have some serious decisions to make at this point. I would like to present the interior open somehow. Either I show the turret tilted up, with the gun being installed, or I simply make a “cutaway”. (I saw a photo on the T-54, T-55 group’s facebook page.)

The first version would be the most attractive solution, but the problem is I’ve installed everything already: ammunition, equipment, etc. A tank would be stripped out before the turret is lifted, so it would not be very realistic.
The second option would be to simply leave the top of the turret off- held up by a couple of plastic pegs, showing the interior off. (This way I don’t have to cut and saw into the plastic. With the King Tiger and other large tanks there are parts you can cut away easily; with the T-54 I would be taking a lot of detail away if I cut parts of the turret away. Since the driver’s position and the engine compartment are not very well detailed regrettably I will not cut into the hull, as there’s not much to display… But MiniArt has made the turret halves join up as they did in the original tank.